[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

system/1542: xl & media type




>Number:         1542
>Category:       system
>Synopsis:       Media options fail with xl
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    bugs
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Dec  4 09:50:01 MST 2000
>Last-Modified:
>Originator:     Joe Warren-Meeks
>Organization:
net
>Release:        2.8
>Environment:
	System      : OpenBSD 2.8
	Architecture: OpenBSD.i386
	Machine     : i386
>Description:
	Manually setting the media to 100baseTX fails on a xl card
connected to a fast ethernet switch with the remote port nailed to
100baseTX:

root@gunhed:/root # ifconfig xl0 media 100baseTX mediaopt full-duplex 
ifconfig: SIOCSIFMEDIA: Device not configured
root@gunhed:/root # ifconfig xl0 media 100baseTX                      
ifconfig: SIOCSIFMEDIA: Device not configured
root@gunhed:/root # ifconfig xl0 mediaopt full-duplex
ifconfig: SIOCSIFMEDIA: Device not configured
root@gunhed:/root # ifconfig xl0
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        media: Ethernet none (none)
        inet 10.0.0.72 netmask 0xfffffe00 broadcast 10.0.1.255
        inet6 fe80::2b0:d0ff:fea1:465e%xl0 prefixlen 64 scopeid 0x1
root@gunhed:/root # 

This fails if the /etc/hostname.xl0 file contains the correct options
too.

>How-To-Repeat:
	See above.
>Fix:
	unknown	

Dmesg:

OpenBSD 2.8 (Gunhed) #0: Mon Dec  4 15:29:47 GMT 2000
    root@gunhed:/usr/src/sys/arch/i386/compile/Gunhed
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 798 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 133406720 (130280K)
avail mem = 120963072 (118128K)
using 1654 buffers containing 6774784 bytes (6616K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 08/10/00, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x10000]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfbbc0, size 176 bytes (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x2500 rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82820 AGP" rev 0x04
pci1 at ppb0 bus 1
"Matrox MGA G400 AGP" rev 0x04 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci2 at ppb1 bus 2
"Creative Labs SoundBlaster Live" rev 0x07 at pci2 dev 7 function 0 not configured
"Creative Labs SoundBlaster Digital Input" rev 0x07 at pci2 dev 7 function 1 not configured
xl0 at pci2 dev 12 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5 address 00:b0:d0:a1:46:5e
OUI 0x001018 model 0x0017 rev 7 at xl0 phy 24 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC Interface" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD100BB-75AUA1>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd0: 16-sector PIO, LBA, 9541MB, 16383 cyl, 16 head, 63 sec, 19541088 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (using DMA data transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DV-5700A, 3.07> SCSI0 5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
"Intel 82801AA USB" rev 0x02 at pci0 dev 31 function 2 not configured
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c040 netmask c060 ttymask d0e2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

>Audit-Trail:
>Unformatted: