[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: system/1542: xl & media type
The following reply was made to PR system/1542; it has been noted by GNATS.
From: Michael Shalayeff <mickey@lucifier.remote.dti.net>
To: joe@hole-in-the.net
Cc: gnats@openbsd.org
Subject: Re: system/1542: xl & media type
Date: Thu, 7 Dec 2000 12:30:09 -0500 (EST)
re
so, have you resolved this by adding the proper phy driver?
cu
Making, drinking tea and reading an opus magnum from joe@hole-in-the.net:
>
> >Number: 1542
> >Category: system
> >Synopsis: Media options fail with xl
> >Confidential: no
> >Severity: serious
> >Priority: high
> >Responsible: bugs
> >State: open
> >Class: sw-bug
> >Submitter-Id: net
> >Arrival-Date: Mon Dec 4 09:50:01 MST 2000
> >Last-Modified:
> >Originator: Joe Warren-Meeks
> >Organization:
> net
> >Release: 2.8
> >Environment:
> System : OpenBSD 2.8
> Architecture: OpenBSD.i386
> Machine : i386
> >Description:
> Manually setting the media to 100baseTX fails on a xl card
> connected to a fast ethernet switch with the remote port nailed to
> 100baseTX:
>
> root@gunhed:/root # ifconfig xl0 media 100baseTX mediaopt full-duplex
> ifconfig: SIOCSIFMEDIA: Device not configured
> root@gunhed:/root # ifconfig xl0 media 100baseTX
> ifconfig: SIOCSIFMEDIA: Device not configured
> root@gunhed:/root # ifconfig xl0 mediaopt full-duplex
> ifconfig: SIOCSIFMEDIA: Device not configured
> root@gunhed:/root # ifconfig xl0
> xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> media: Ethernet none (none)
> inet 10.0.0.72 netmask 0xfffffe00 broadcast 10.0.1.255
> inet6 fe80::2b0:d0ff:fea1:465e%xl0 prefixlen 64 scopeid 0x1
> root@gunhed:/root #
>
> This fails if the /etc/hostname.xl0 file contains the correct options
> too.
>
> >How-To-Repeat:
> See above.
> >Fix:
> unknown
>
> Dmesg:
>
> OpenBSD 2.8 (Gunhed) #0: Mon Dec 4 15:29:47 GMT 2000
> root@gunhed:/usr/src/sys/arch/i386/compile/Gunhed
> cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 798 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
> real mem = 133406720 (130280K)
> avail mem = 120963072 (118128K)
> using 1654 buffers containing 6774784 bytes (6616K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 08/10/00, BIOS32 rev. 0 @ 0xffe90
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x10000]
> pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfbbc0, size 176 bytes (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x2500 rev 0x04
> ppb0 at pci0 dev 1 function 0 "Intel 82820 AGP" rev 0x04
> pci1 at ppb0 bus 1
> "Matrox MGA G400 AGP" rev 0x04 at pci1 dev 0 function 0 not configured
> ppb1 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
> pci2 at ppb1 bus 2
> "Creative Labs SoundBlaster Live" rev 0x07 at pci2 dev 7 function 0 not configured
> "Creative Labs SoundBlaster Digital Input" rev 0x07 at pci2 dev 7 function 1 not configured
> xl0 at pci2 dev 12 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5 address 00:b0:d0:a1:46:5e
> OUI 0x001018 model 0x0017 rev 7 at xl0 phy 24 not configured
> pcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC Interface" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <WDC WD100BB-75AUA1>
> wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 4
> wd0: 16-sector PIO, LBA, 9541MB, 16383 cyl, 16 head, 63 sec, 19541088 sectors
> pciide0: channel 0 interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (using DMA data transfers)
> atapiscsi0 at pciide0 channel 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <_NEC, DV-5700A, 3.07> SCSI0 5/cdrom removable
> cd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> pciide0: channel 1 interrupting at irq 15
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
> "Intel 82801AA USB" rev 0x02 at pci0 dev 31 function 2 not configured
> "Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
> isa0 at pcib0
> isadma0 at isa0
> pcppi0 at isa0 port 0x61
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
> pms0 at vt0 irq 12
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask c040 netmask c060 ttymask d0e2
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
> >Audit-Trail:
> >Unformatted:
>
--
paranoic mickey (my employers have changed but, the name has remained)