Re: 3.0 Install on Sparc64 completes, but on reboot machine never boots past kernel

[Miod Vallat <miod@online.fr>]

> pcons doesn't attach when some other console has attached. On ultra1 it's a
> zs. But it would be nice to see the whole dmesg anyway.

This is what happened - we solved this in private mail.
For the record, dmesg and output of eeprom follow.

Miod

brick# dmesg
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2001 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 3.0 (GENERIC) #27: Wed Oct 17 17:49:00 MDT 2001
    deraadt@sparc64:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 469762048
avail memory = 439558144
using 200 buffers containing 13107200 of memory
bootpath: /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@0,0
mainbus0 (root): SUNW,Ultra-1
cpu0 at mainbus0: SUNW,UltraSPARC @ 167 MHz, version 0 FPU
cpu0: physical 4K instruction (32 b/l), 4K data (32 b/l), 2048K external (64
b/l)
timer0 at mainbus0 addr 0xfffc3c00 irq vectors 7f0 and 7f1
sbus0 at mainbus0 addr 0xfffcc000: clock = 25 MHz
DVMA map: ff800000 to 0
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 13
audio0 at audiocs0
auxio at sbus0 slot 15 offset 0x1900000 not configured
flashprom at sbus0 slot 15 offset 0x0 not configured
SUNW,fdtwo at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 not configured
clock0 at sbus0 slot 15 offset 0x1200000: mk48t59: hostid 808962b5
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zstty2 at zs1 channel 0 (console input)
zstty3 at zs1 channel 1
sc at sbus0 slot 15 offset 0x1300000 not configured
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
dma0 at sbus0 slot 14 offset 0x8400000: dma rev 2
esp0 at dma0 slot 14 offset 0x8800000 vector 20 ipl 3: ESP200, 40MHz, SCSI
ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST34371W SUN4.2G, 3162> SCSI2
0/direct fixed
sd0: 4094MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sec, 8385121 sec total
ledma0 at sbus0 slot 14 offset 0x8400010: dma rev 2
le0 at ledma0 slot 14 offset 0x8c00000 vector 21 ipl 6: address
08:00:20:89:62:b5
le0: 8 receive buffers, 2 transmit buffers
SUNW,bpp at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2 not configured
cgsix at sbus0 slot 2 offset 0x0 vector 5 ipl 5 not configured
pcons at mainbus0 not configured
root on sd0a
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102
WARNING: / was not properly unmounted
brick# eeprom
tpe-link-test?=true
scsi-initiator-id=7
keyboard-click?=false
keymap=
ttyb-rts-dtr-off=false
ttyb-ignore-cd=true
ttya-rts-dtr-off=false
ttya-ignore-cd=true
ttyb-mode=9600,8,n,1,-
ttya-mode=9600,8,n,1,-
sbus-probe-list=012
mfg-mode=off
diag-level=max
#power-cycles=91
system-board-serial#=5013084075679
system-board-date=347affa7
fcode-debug?=false
output-device=screen
input-device=keyboard
load-base=16384
boot-command=boot
auto-boot?=true
watchdog-reboot?=false
diag-file=
diag-device=net
boot-file=
boot-device=disk net
local-mac-address?=false
ansi-terminal?=true
screen-#columns=80
screen-#rows=34
silent-mode?=false
use-nvramrc?=false
nvramrc=
eeprom: property `security-mode' not yet supported
eeprom: property `security-password' not yet supported
security-#badlogins=0
eeprom: property `oem-logo' not yet supported
oem-logo?=false
oem-banner=
oem-banner?=false
hardware-revision=
last-hardware-update=
diag-switch?=false
name=options