Problem identifying Intel 1000 GB nic on PowerEdge 750

[Carlos Martinez <cmartinez@q3arena.com>]

Specs:: Dell PowerEdge 750 w/ dual Intel 1000 NICS.
Installed perfect, just didnt identify the Intel onboard NICS.

vendor "Intel", unknown product 0x1075 (class network subclass ethernet,
rev 0x00) at pci1 dev 1 function 0 not configured
ppb1 at pci0 dev 28 function 0 vendor "Intel", unknown product 0x25ae 
rev 0x02

vendor "Intel", unknown product 0x1076 (class network subclass ethernet, rev 0x00) at pci3 dev 2 function 0 not configured

|Any suggestions,anything I can send you , or what can I do to
get the driver to work. Its suppose to be an i386 supported driver
I did run enable em* showed it was already configured, just
doest show up when I run an 'ifconfig -a'


Heres the complete dmesg output from GENERIC
Thanks

CM
===================================
OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SIMD,SIMD2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1073070080 (1047920K)
avail mem = 989917184 (966716K)
using 4278 buffers containing 53755904 bytes (52496K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/02/04, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfc570/144 (7 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x25a1
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000 0xec000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
pci1 at ppb0 bus 1
vendor "Intel", unknown product 0x1075 (class network subclass ethernet, rev 0x00) at pci1 dev 1 function 0 not configured
ppb1 at pci0 dev 28 function 0 vendor "Intel", unknown product 0x25ae rev 0x02
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x25a9 rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 vendor "Intel", unknown product 0x25aa rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
vendor "Intel", unknown product 0x25ab (class system subclass miscellaneous, rev 0x02) at pci0 dev 29 function 4 not configured
vendor "Intel", unknown product 0x25ac (class system subclass 8259 PIC, rev 0x02) at pci0 dev 29 function 5 not configured
vendor "Intel", unknown product 0x25ad (class serial bus subclass USB, rev 0x02) at pci0 dev 29 function 7 not configured
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci3 at ppb2 bus 3
vendor "Intel", unknown product 0x1076 (class network subclass ethernet, rev 0x00) at pci3 dev 2 function 0 not configured
vga1 at pci3 dev 14 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x25a1 rev 0x02
pciide0 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x25a3 rev 0x02: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, K.9A> SCSI0 5/cdrom removable
wd0 at pciide0 channel 1 drive 0: <ST340014AS>
wd0: 16-sector PIO, LBA48, 38146MB, 16383 cyl, 16 head, 63 sec, 78125000 sectors
vendor "Intel", unknown product 0x25a4 (class serial bus subclass SMBus, rev 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask cc40 netmask cc40 ttymask dc42
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302


_____________________________________________________________
Free Email ---> http://mail.q3arena.com/
Webhosting ---> http://www.webhosting.tv/