[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: macppc snapshot blows up on g4 pbook 400mhz [update]

To: bugs@openbsd.org
Subject: Re: macppc snapshot blows up on g4 pbook 400mhz [update]
From: Jared Yanovich <jjy2+@pitt.edu>
Date: Sat, 27 Mar 2004 09:53:55 -0500
References: <20040326222523.5e137f4d.jjy2+@pitt.edu>
The machine has 384MB of RAM. Here's a 3.4 dmesg:

[ bsd ELF symbol table not valid: symtab unaligned ]
[ bsd symbol table has bad string table address 0x7fb9114a ]
[ no symbol table formats found ]
console out [ATY,RageM3p12A]console in [keyboard] ADB found
using parent ATY,RageM3p12Parent:: memaddr b4000000 size 4000000, : consaddr b6008000, : ioaddr b0020000, size 20000: memtag 8000, iotag 8000: width 1152 linebytes 1280 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2003 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.4 (RAMDISK) #99: Tue Sep 16 15:45:39 MDT 2003
    deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/RAMDISK
real mem = 402653184 (393216K)
avail mem = 357199872 (348828K)
using 1254 buffers containing 20131840 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 7410 (Revision 1103): 400 MHz: 1MB backside cache
memc0 at mainbus0: uni-n
mpcpcibr0 at mainbus0: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Mobility M3" rev 0x02, mmio
wsdisplay0 at vgafb0: console (std, vt100 emulation)
mpcpcibr1 at mainbus0: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0: version 0x4614
gpio_obio0 at macobio0
gpio_obio1 at gpio_obio0 irq 47
programmer-switch at gpio_obio0 not configured
firewire-linkon at gpio_obio0 not configured
zsc0 at macobio0: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at macobio0 irq 25: via-pmu 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
adb0 addr 3: relative positioning device (1) not configured
adb0 addr 7:  unsupported
wdc0 at macobio0 irq 19: DMA transfer
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: 16-sector PIO, LBA, 9590MB, 16383 cyl, 16 head, 63 sec, 19640880 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 irq 20: DMA transfer
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8187, HA18> SCSI0 5/cdrom removable
cd0(wdc1:0:0): using BIOS timings, DMA mode 2
wdc2 at macobio0 irq 21: DMA transfer
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cbb0 at pci1 dev 26 function 0 "Texas Instruments PCI1211 PCI-CardBus" rev 0x00: irq 58
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
mpcpcibr2 at mainbus0: uni-north, Revision 0xff
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N Eth" rev 0x00
vendor "Apple", unknown product 0x18 (class serial bus subclass Firewire, rev 0x01) at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple GMAC" rev 0x01
gem0: address 00:03:93:12:c5:b0
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 3
gem0: using irq 41 for interrupt
rd0: fixed, 8192 blocks
bootpath: '/pci@f2000000/mac-io@17/ata-3@20000/disk@0/3.4/macppc/bsd.rd'
rootdev=0x1100 rrootdev=0x1100 rawdev=0x1102
WARNING: clock gained 192 days -- CHECK AND RESET THE DATE!
"Cisco Systems, 350 Series Wireless LAN Adapter" (manufacturer 0x15f, product 0xa) at pcmcia0 function 0 not configured

Here's a 3.5 snapshot bsd.rd dmesg:

[ bsd ELF symbol table not valid: symtab unaligned ]
[ bsd symbol table has bad string table address 0x7fbc693a ]
[ no symbol table formats found ]
console out [ATY,RageM3p12A]console in [keyboard] ADB found
using parent ATY,RageM3p12Parent:: memaddr b4000000 size 4000000, : consaddr b6008000, : ioaddr b0020000, size 20000: memtag 8000, iotag 8000: width 1152 linebytes 1280 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.5 (RAMDISK) #135: Thu Mar 25 01:11:50 MST 2004
    deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/RAMDISK
real mem = 402653184 (393216K)
avail mem = 357015552 (348648K)
using 1254 buffers containing 20131840 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 7410 (Revision 1103): 400 MHz: 1MB backside cache
memc0 at mainbus0: uni-n
mpcpcibr0 at mainbus0: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Mobility M3" rev 0x02, mmio
wsdisplay0 at vgafb0: console (std, vt100 emulation)
mpcpcibr1 at mainbus0: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0: version 0x4614
gpio_obio0 at macobio0
gpio_obio1 at gpio_obio0 irq 47
programmer-switch at gpio_obio0 not configured
firewire-linkon at gpio_obio0 not configured
zsc0 at macobio0: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at macobio0 irq 25: via-pmu 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G4 keyboard (Inverted T)
wskbd0 at akbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
adb0 addr 3: relative positioning device (1) not configured
adb0 addr 7:  unsupported
wdc0 at macobio0 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <TOSHIBA MK1016GAP>
wd0: 16-sector PIO, LBA, 9590MB, 19640880 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 irq 20: DMA
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8187, HA18> SCSI0 5/cdrom removable
cd0(wdc1:0:0): using BIOS timings, DMA mode 2
wdc2 at macobio0 irq 21: DMA
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cbb0 at pci1 dev 26 function 0 "Texas Instruments PCI1211 CardBus" rev 0x00: irq 58
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
mpcpcibr2 at mainbus0: uni-north, Revision 0xff
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N Eth" rev 0x00
vendor "Apple", unknown product 0x18 (class serial bus subclass Firewire, rev 0x01) at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple GMAC" rev 0x01
gem0: address 00:03:93:12:c5:b0
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 3
gem0: using irq 41 for interrupt
rd0: fixed, 8192 blocks
bootpath: '/pci@f2000000/mac-io@17/ata-3@20000/disk@0/3.5/macppc/bsd.rd'
rootdev=0x1100 rrootdev=0x1100 rawdev=0x1102
WARNING: clock gained 2 days -- CHECK AND RESET THE DATE!
"Cisco Systems, 350 Series Wireless LAN Adapter" (manufacturer 0x15f, product 0xa) at pcmcia0 function 0 not configured

I've downloaded from multiple mirrors and have burnt and tested the
images multiple times, and it keeps happening.


On Fri, 26 Mar 2004 22:25:23 -0500
Jared Yanovich <jjy2+@pitt.edu> wrote:

> The latest snapshot cd35.iso produces the following:
> 
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>         The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2004 OpenBSD. All rights reserved.  http://www.OpenBSD.org
> 
> panic: uvm_km_init: could not reserve space for kernel
> Stopped at      0x23db00:       lwz r0,20(r1)
> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
> ddb>
> 
> I am unable to type at the keyboard, else I would have attached some trace
> output.  The 3.4 cd34.iso works fine.  The machine is a PowerBook G4 400MHz,
> the revision A model.  Any suggestions?
References:
- macppc snapshot blows up on g4 pbook 400mhz
  - From: Jared Yanovich <jjy2+@pitt.edu>
Prev by Date: Re: macppc snapshot blows up on g4 pbook 400mhz
Next by Date: Re: kernel/3729: DMA on soekris net4801 (NS SCx200 IDE) freeze kernel.
Prev by thread: Re: macppc snapshot blows up on g4 pbook 400mhz
Next by thread: Re: macppc snapshot blows up on g4 pbook 400mhz
Index(es):
- Date
- Thread