system/3804: Starting X makes virtual terminals unusable.

[JB Robertson <jibe@freeshell.org>]

>Number:         3804
>Category:       system
>Synopsis:       Starting X makes virtual terminals unusable.
>Confidential:   yes
>Severity:       non-critical
>Priority:       low
>Responsible:    bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Jun 01 22:30:02 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator:     jibe
>Release:        -release and -current
>Organization:
net
>Environment:
	
	System      : OpenBSD 3.5
	Architecture: OpenBSD.i386
	Machine     : i386
>Description:
All the virtual terminals are foobared after I start X (by way of startx
or xdm).  They seem to display a portion of the memory (moving pixels of 
color, etc).

My dmesg follows.  I've put my XF86Config and XFree86.0.log here:
	http://sakeos.net/~jibe/x-foo/

I'll try to add a picture...

Basically, the mainboard is a via cl 10000 and I've done no tweaking
whatsoever.

>How-To-Repeat:

Just run xdm or startx.


OpenBSD 3.5-current (GENERIC) #3: Mon May 31 16:09:32 CEST 2004
    root@tsoupi.fl.sakeos.net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Nehemiah ("CentaurHauls" 686-class) 1.01 GHz
cpu0: FPU,DE,PSE,TSC,MSR,MTRR,PGE,CMOV,MMX,FXSR,SSE
cpu0: RNG
real mem  = 234401792 (228908K)
avail mem = 208740352 (203848K)
using 2886 buffers containing 11821056 bytes (11544K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(5e) BIOS, date 08/01/03, BIOS32 rev. 0 @ 0xfaff0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xdf44
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdeb0/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 9 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xe000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03: aperture at 0xe4000000, size 0x10000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vr0 at pci0 dev 15 function 0 "VIA VT6105 RhineIII" rev 0x8b: irq 9 address 00:40:63:c9:ff:8d
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063, model 0x0034, rev. 9
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB 2.0" rev 0x82: irq 9
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-RW CRX230E, QYS1> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97 Audio" rev 0x50: irq 11
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr1 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11 address 00:40:63:c9:ff:8c
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x004063, model 0x0032, rev. 5
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ca40 netmask ca40 ttymask dac2
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302



----- End forwarded message -----


>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted: