Re: Problems with Dell PERC 4/SC raid controller

[Andrey Smagin <andrey@smagin.com>]

On Fri, Jun 18, 2004 at 06:16:45PM -0500, Marco Peereboom wrote:
> That is odd.  Did you by any chance try the latest GENERIC?

Tried booting the latest GENERIC this morning - same thing, dmesg below.

> What is the mpt firmware version (not MPTBIOS! see the man page for  
> 3.5-release)?

1.03.10 (1030A00)

dmesg:
------

Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.5-current (GENERIC) #165: Sun Jun 20 12:46:59 MDT 2004
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1073197056 (1048044K)
avail mem = 987516928 (964372K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfc200/176 (9 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1166 product 0x0201
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xe3000/0x7800! 0xec000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC_SL Host" rev 0x32
pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC_SL Host" rev 0x00
pci1 at pchb1 bus 1
mpt0 at pci1 dev 4 function 0 "Symbios Logic 53c1030" rev 0x07: irq 5
mpt0: sending FW Upload request to IOC (size: 36, img size: 33644)
scsibus0 at mpt0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST373307LW, DS09> SCSI3 0/direct fixed
sd0: 70007MB, 49855 cyl, 4 head, 718 sec, 512 bytes/sec, 143374650 sec total
sd1 at scsibus0 targ 2 lun 0: <MAXTOR, ATLAS10K4_73WLS, DFL0> SCSI3 0/direct fixed
sd1: 70149MB, 49070 cyl, 4 head, 731 sec, 512 bytes/sec, 143666192 sec total
sd2 at scsibus0 targ 4 lun 0: <MAXTOR, ATLAS10K4_73WLS, DFL0> SCSI3 0/direct fixed
sd2: 70149MB, 49070 cyl, 4 head, 731 sec, 512 bytes/sec, 143666192 sec total
sd3 at scsibus0 targ 6 lun 0: <MAXTOR, ATLAS10K4_73WLS, DFL0> SCSI3 0/direct fixed
sd3: 70149MB, 49070 cyl, 4 head, 731 sec, 512 bytes/sec, 143666192 sec total
mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 1 DT 1 IU 1
mpt0: target 2 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpt0: target 4 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
mpt0: target 6 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
em0 at pci0 dev 2 function 0 "Intel PRO/1000MT (82540EM)" rev 0x02: irq 11, address: 00:c0:9f:39:c2:e1
vga1 at pci0 dev 14 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb2 at pci0 dev 15 function 0 "ServerWorks CSB5 SouthBridge" rev 0x93
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
wd0 at pciide0 channel 0 drive 0: <WDC AC21600H>
wd0: 16-sector PIO, LBA, 1549MB, 3173184 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SAMSUNG, CD-ROM SC-148A, B403> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 10, version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00
pchb3 at pci0 dev 16 function 0 "ServerWorks CIOBX2" rev 0x05
pchb4 at pci0 dev 16 function 2 "ServerWorks CIOBX2" rev 0x05
pci2 at pchb4 bus 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e76d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
mpt0: command timeout
sd0(mpt0:0:0): mpt0: timeout on request index = 0xfe, seq = 0x000000b3
mpt0: Status 0x80000000, Mask 0x00000001, Doorbell 0x24000000
mpt0: request state: On Chip
mpt0: command timeout
sd0(mpt0:0:0): mpt0: timeout on request index = 0xfe, seq = 0x000000b4
mpt0: Status 0x80000000, Mask 0x00000001, Doorbell 0x24000000
mpt0: request state: On Chip
mpt0: command timeout
sd0(mpt0:0:0): mpt0: timeout on request index = 0xfe, seq = 0x000000b5
mpt0: Status 0x80000000, Mask 0x00000001, Doorbell 0x24000000
mpt0: request state: On Chip
mpt0: command timeout
sd0(mpt0:0:0): mpt0: timeout on request index = 0xfe, seq = 0x000000b6
mpt0: Status 0x80000000, Mask 0x00000001, Doorbell 0x24000000
mpt0: request state: On Chip
mpt0: command timeout
sd0(mpt0:0:0): mpt0: timeout on request index = 0xfe, seq = 0x000000b7
mpt0: Status 0x80000000, Mask 0x00000001, Doorbell 0x24000000
mpt0: request state: On Chip
mpt0: command timeout
sd0(mpt0:0:0): mpt0: timeout on request index = 0xfe, seq = 0x000000b8
mpt0: Status 0x80000000, Mask 0x00000001, Doorbell 0x24000000
mpt0: request state: On Chip