[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
CDROM Atapi problems
I can't use my cdrom drive, I was probe my box wtih other cdrom drive and I
have not problems with the drive..
I check the drive not detected in other machine and I have not problems.
I have problems only with OpenBSD2.6 with 2.5 version this not succesd.
Thank you for advanced
Have a nice day
Alex
---
OpenBSD 2.6 (GENERIC) #696: Tue Nov 2 01:46:05 MST 1999
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 166 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
BIOS mem = 654336 conventional, 48234496 extended
real mem = 48889856
avail mem = 41279488
using 622 buffers containing 2547712 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c5) BIOS, date 07/30/97
bios0: diskinfo 0xe055800c cksumlen 1 memmap 0xe0558088 pciinfo 0xe055810c apminfo 0xe0558128
apm at bios0 function 0x15 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SIS 5511" rev 0x00
pcib0 at pci0 dev 1 function 0 "SIS 85C503 ISA" rev 0x01
pciide0 at pci0 dev 1 function 1 "SIS 5513 EIDE" rev 0xc0: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 interrupting at irq 14
atapiscsi0 at pciide0 channel 0
scsibus0 at atapiscsi0: 2 targets
wdc_atapi_intr_drq: Unexpectedly in the command phase. Please report this.
>>>>>>>>>>>>>>>>CHECK THIS<<<<<<<<<<<<<<<<<<<<<
wd0 at pciide0 channel 0 drive 0: <SAMSUNG WA32162A>
wd0: can use 16-bit, PIO mode 4
wd0: 16-sector PIO, LBA, 2060MB, 4186 cyl, 16 head, 63 sec, 4219488 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ep0 at pci0 dev 6 function 0 "3Com 3c590 10Mbps" rev 0x00: address 00:a0:24:9c:70:ea, utp default utp/autoselect irq 11
vendor "SIS", unknown product 0x205 (class display, subclass VGA, rev 0xd3) at pci0 dev 19 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4840 ttymask 58c2
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
msadndwbhsda~e-mail: alex@montebello.unach.mx
Tel: [52](961)51322
Fax: [52](961)54937
ICQ: 48337064