Re: CDROM Atapi problems

[Rick Pettit <rpettit@speedqueen.core.com>]

On Thu, 16 Dec 1999, Jesus Alejandro Juarez Robles wrote:

> I can't use my cdrom drive, I was probe my box wtih other cdrom drive and I 
> have not problems with the drive..
> I check the drive not detected in other machine and I have not problems.

	There is a good chance that you have an atapi cdrom if it worked
for 2.5 and does not work for 2.6.  I had this problem at first as well.
If you used to address your cdrom with the device file /dev/acdx, where x
is probably 0, then your cdrom as well as some scsi stuff is supported as
/dev/cdx now.  

	If you used to do 'mount -t cd9660 /dev/acd0 <mount point>', then
try 'mount -t cd9660 /dev/cd0 <mount point>'.  Hope that helps.

							-Rick


> 
> I have problems only with OpenBSD2.6 with 2.5 version this not succesd.
> 
> Thank you for advanced
> Have a nice day
> 
> Alex
> ---
> OpenBSD 2.6 (GENERIC) #696: Tue Nov  2 01:46:05 MST 1999
>     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: F00F bug workaround installed
> cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 166 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
> BIOS mem  = 654336 conventional, 48234496 extended
> real mem  = 48889856
> avail mem = 41279488
> using 622 buffers containing 2547712 bytes of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(c5) BIOS, date 07/30/97
> bios0: diskinfo 0xe055800c cksumlen 1 memmap 0xe0558088 pciinfo 0xe055810c apminfo 0xe0558128
> apm at bios0 function 0x15 not configured
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "SIS 5511" rev 0x00
> pcib0 at pci0 dev 1 function 0 "SIS 85C503 ISA" rev 0x01
> pciide0 at pci0 dev 1 function 1 "SIS 5513 EIDE" rev 0xc0: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 interrupting at irq 14
> atapiscsi0 at pciide0 channel 0
> scsibus0 at atapiscsi0: 2 targets
> wdc_atapi_intr_drq: Unexpectedly in the command phase. Please report this.
> >>>>>>>>>>>>>>>>CHECK THIS<<<<<<<<<<<<<<<<<<<<<
> wd0 at pciide0 channel 0 drive 0: <SAMSUNG WA32162A>
> wd0: can use 16-bit, PIO mode 4
> wd0: 16-sector PIO, LBA, 2060MB, 4186 cyl, 16 head, 63 sec, 4219488 sectors
> pciide0: channel 1 ignored (not responding; disabled or no drives?)
> ep0 at pci0 dev 6 function 0 "3Com 3c590 10Mbps" rev 0x00: address 00:a0:24:9c:70:ea, utp default utp/autoselect irq 11
> vendor "SIS", unknown product 0x205 (class display, subclass VGA, rev 0xd3) at pci0 dev 19 function 0 not configured
> isa0 at pcib0
> isadma0 at isa0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
> pms0 at vt0 irq 12
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask 4040 netmask 4840 ttymask 58c2
> pctr: 586-class performance counters and user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> 
> 
> msadndwbhsda~e-mail: alex@montebello.unach.mx  
> Tel: 	[52](961)51322
> Fax: 	[52](961)54937
> ICQ:	48337064
> 
>