Re: CDROM Atapi problems

[Rick Pettit <rpettit@speedqueen.core.com>]

On Thu, 16 Dec 1999, Rick Pettit wrote:

> 
> 
> On Thu, 16 Dec 1999, Jesus Alejandro Juarez Robles wrote:
> 
> > I can't use my cdrom drive, I was probe my box wtih other cdrom drive and I 
> > have not problems with the drive..
> > I check the drive not detected in other machine and I have not problems.
> 
> 	There is a good chance that you have an atapi cdrom if it worked
> for 2.5 and does not work for 2.6.  I had this problem at first as well.
> If you used to address your cdrom with the device file /dev/acdx, where x
> is probably 0, then your cdrom as well as some scsi stuff is supported as
> /dev/cdx now.  
> 
> 	If you used to do 'mount -t cd9660 /dev/acd0 <mount point>', then
> try 'mount -t cd9660 /dev/cd0 <mount point>'.  Hope that helps.
> 
> 							-Rick


	Just realized that you *did* include dmesg output.  I am looking
at it now.  Boy I feel like a real moron.  Sorry about that.  As it turns
out if my previous advice does not work (and it may not having looked at
your dmesg) you may need to turn to a higher power (or just one that has
more of a clue).  Sorry again.

								-Rick

> 
> 
> > 
> > I have problems only with OpenBSD2.6 with 2.5 version this not succesd.
> > 
> > Thank you for advanced
> > Have a nice day
> > 
> > Alex
> > ---
> > OpenBSD 2.6 (GENERIC) #696: Tue Nov  2 01:46:05 MST 1999
> >     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: F00F bug workaround installed
> > cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 166 MHz
> > cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
> > BIOS mem  = 654336 conventional, 48234496 extended
> > real mem  = 48889856
> > avail mem = 41279488
> > using 622 buffers containing 2547712 bytes of memory
> > mainbus0 (root)
> > bios0 at mainbus0: AT/286+(c5) BIOS, date 07/30/97
> > bios0: diskinfo 0xe055800c cksumlen 1 memmap 0xe0558088 pciinfo 0xe055810c apminfo 0xe0558128
> > apm at bios0 function 0x15 not configured
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "SIS 5511" rev 0x00
> > pcib0 at pci0 dev 1 function 0 "SIS 85C503 ISA" rev 0x01
> > pciide0 at pci0 dev 1 function 1 "SIS 5513 EIDE" rev 0xc0: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility
> > pciide0: channel 0 interrupting at irq 14
> > atapiscsi0 at pciide0 channel 0
> > scsibus0 at atapiscsi0: 2 targets
> > wdc_atapi_intr_drq: Unexpectedly in the command phase. Please report this.
> > >>>>>>>>>>>>>>>>CHECK THIS<<<<<<<<<<<<<<<<<<<<<
> > wd0 at pciide0 channel 0 drive 0: <SAMSUNG WA32162A>
> > wd0: can use 16-bit, PIO mode 4
> > wd0: 16-sector PIO, LBA, 2060MB, 4186 cyl, 16 head, 63 sec, 4219488 sectors
> > pciide0: channel 1 ignored (not responding; disabled or no drives?)
> > ep0 at pci0 dev 6 function 0 "3Com 3c590 10Mbps" rev 0x00: address 00:a0:24:9c:70:ea, utp default utp/autoselect irq 11
> > vendor "SIS", unknown product 0x205 (class display, subclass VGA, rev 0xd3) at pci0 dev 19 function 0 not configured
> > isa0 at pcib0
> > isadma0 at isa0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > sysbeep0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > npx0 at isa0 port 0xf0/16: using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
> > pms0 at vt0 irq 12
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > biomask 4040 netmask 4840 ttymask 58c2
> > pctr: 586-class performance counters and user-level cycle counter enabled
> > dkcsum: wd0 matched BIOS disk 80
> > root on wd0a
> > rootdev=0x0 rrootdev=0x300 rawdev=0x302
> > 
> > 
> > msadndwbhsda~e-mail: alex@montebello.unach.mx  
> > Tel: 	[52](961)51322
> > Fax: 	[52](961)54937
> > ICQ:	48337064
> > 
> > 
> 
>