2.6: Where'd my HD go?

["Andrew D. Myers" <myers@pobox.com>]

I installed OpenBSD 2.5 on an old Pentium last fall, figuring to use it to
get a feel for the OS and use it as a firewall for my home LAN.  Got it all
installed just peachy, then didn't have time to look at it again until now.

Since I hadn't done anything beyond installing, I decided to blast it clean
and install 2.6.  The 2.6 boot disk seems to have trouble recognizing my
circa-1994 system's EIDE controller, where 2.5 had no trouble at all.  I've
twiddled all manner of BIOS settings related to the drive and the controller
to no avail.  And I've tried both floppy26.fs and floppyB26.fs.

I've attached the contents of /kern/msgbuf from both the 2.5 and 2.6 boot
disks, in hopes that someone might spot something and have a suggestion or
two.  Any insight would be most welcome, as it's kind of tricky to install
when you can't see wd0 :)



OpenBSD 2.6 (RAMDISK) #270: Tue Nov  2 02:08:57 MST 1999
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P5) ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
BIOS mem  = 654336 conventional, 49283072 extended
real mem  = 49938432
avail mem = 42549248
using 635 buffers containing 2600960 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/16/94
bios0: diskinfo 0xe051a00c cksumlen 1 memmap 0xe051a088 pciinfo 0xe051a0e4
pci0 at mainbus0 bus 0: configuration mode 2 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82434LX/NX (Mercury/Neptune)
PCI/Cache/DRAM" rev 0x03
pciide0 at pci0 dev 1 function 0 "PC Technology RZ1000" rev 0x01: no DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (other hardware responding at addresses)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82378IB PCI-ISA (System I/O)" rev 0x00 at pci0 dev 2 function 0 not
configured
"ATI Technologies Mach32" rev 0x01 at pci0 dev 12 function 0 not configured
isa0 at mainbus0
isadma0 at isa0
wdc0 at isa0 port 0x1f0/8 irq 14
ne0 at isa0 port 0x240/32 irq 9
ne0: NE2000 Ethernet
ne0: address 00:40:05:16:b5:02
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4240 ttymask 4242
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
WARNING: NVRAM century is 20 but RTC year is 2000


OpenBSD 2.5 (RAMDISK) #136: Fri Apr 16 09:25:05 MDT 1999
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: F00F bug workaround installed
cpu0: Intel Pentium ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
BIOS mem  = 654336 conventional, 49283072 extended
real mem  = 49938432
avail mem = 42442752
using 635 buffers containing 2600960 bytes of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/16/94
bios0: pciinfo 0xf053700c diskinfo 0xf0537028 cksumlen 1 memmap 0xf05370a4
pci0 at mainbus0 bus 0: configuration mode 2 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82434LX/NX (Mercury/Neptune)
PCI/Cache/DRAM" rev 0x03
"PC Technology RZ1000" rev 0x01 at pci0 dev 1 function 0 not configured
"Intel 82378IB PCI-ISA (System I/O)" rev 0x00 at pci0 dev 2 function 0 not
configured
"ATI Technologies Mach32" rev 0x01 at pci0 dev 12 function 0 not configured
isa0 at mainbus0
isadma0 at isa0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atapibus0 at wdc0
acd0 at atapibus0 drive 1: <WEARNES CDD-820, B1.0> ATAPI 5/cdrom removable
acd0: 1377Kb/sec, 256Kb cache, audio play, 256 volume levels
wd0 at wdc0 drive 0: <M1606TA>
wd0: 1039MB, 2111 cyl, 16 head, 63 sec, 512 bytes/sec, 2128536 sec total
wd0: using 16-sector 16-bit pio transfers, lba addressing (256KB cache)
ne0 at isa0 port 0x240-0x25f irq 9
ne0: NE2000 Ethernet
ne0: Ethernet address 00:40:05:16:b5:02
npx0 at isa0 port 0xf0-0xff: using exception 16
pccom0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60-0x6f irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
fdc0 at isa0 port 0x3f0-0x3f5 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4240 ttymask 4242
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
WARNING: no swap space found


--
Andrew D. Myers
myers@pobox.com