any idea how to fix this ?

["Angelos D. Keromytis" <angelos@dsl.cis.upenn.edu>]

This is on i386-current as of February 24th. sd0 worked and works just fine,
sd1 (just added) seems problematic.

sd0 at scsibus1 targ 1 lun 0: <QUANTUM, ATLAS 10K 9WLS, UCH0> SCSI3 0/direct 
fix
ed
sd0(ncr0:1:0): WIDE SCSI (16 bit) enabled
sd0(ncr0:1:0): 80.0 MB/s (25 ns, offset 31)
sd0: 8759MB, 10042 cyl, 6 head, 297 sec, 512 bytes/sec, 17938986 sec total
cd1 at scsibus1 targ 4 lun 0: <PLEXTOR, CD-R   PX-W8220T, 1.00> SCSI2 5/cdrom 
re
movable
probe(ncr0:4:1): 10.0 MB/s (100 ns, offset 8)
sd1 at scsibus1 targ 6 lun 0: <QUANTUM, ATLAS_V_18_WLS, 0200> SCSI3 0/direct 
fix
ed
sd1(ncr0:6:0): WIDE SCSI (16 bit) enabled
sd1(ncr0:6:0): 80.0 MB/s (25 ns, offset 31)
sd1: mode sense (5) returned nonsense; using fictitious geometry
ncr0:6: ERROR (0:4) (8-0-0) (1f/9f) @ (script 2a8:1a000000).
ncr0: script cmd = 80080000
ncr0: regdump: da 00 80 9f 47 1f 06 03 ff 08 86 00 00 20 0a 0a.
ncr0: have to clear fifos.
ncr0: aborting job ...
ncr0:6: ERROR (90:1) (8-0-0) (1f/9f) @ (script 5a4:50000000).
ncr0: script cmd = 80000000
ncr0: regdump: da 00 80 9f 47 1f 06 03 31 08 86 00 90 00 0a 0a.
ncr0: restart (fatal error).
sd1(ncr0:6:0): COMMAND FAILED (9 ff) @0xe0cab400.
sd1(ncr0:6:0): could not get size
sd1: 0MB, 0 cyl, 64 head, 32 sec, 512 bytes/sec, 0 sec total


and sd1 is inaccessible after boot (disklabel/fdisk report I/O error when
trying to access (r)sd1c)
-Angelos