Re: 'fatal page fault' with 3/30/00 floppy26.fs

[Jeremie Kass <jeremie@umich.edu>]

Nope, this is a very old regular pcmcia, that I have working on my Dell
Latitude CS just fine.
(http://www.monkey.org/~jeremie/greygoose.dmesg.txt)

  - Jeremie

On Sat, 1 Apr 2000, STeve Andre' wrote:

> Jeremie, is this nic a CardBus card?    OpenBSD doesn't yet support them.
> I tried booting -current with my CardBus Xircom, and got exactly that kind
> of crash, right at a strcmp() if I remember correctly.
> 
> Right now you'll have to use 16 bit non cardbus cards.
> 
> --STeve Andre'
> 
> At 11:19 PM 4/1/00 -0500, Jeremie Kass wrote:
> >Trying to install from the 3/30 snapshot floppy26.fs onto a IBM Thinkpad
> >240 with a Dayna Communicard E 16bit 10mbit PCMCIA card.
> >
> >floppy boots fine, detects ne3, then:
> >
> >pcmcia1 at pcic0 controller 0 socket 1
> >fatal page fault in supervisor mode
> >trap type 6 code 0 eip e02295be cs 8 eflags 10287 cr2 0 cpl 0
> >panic: trap
> >
> >The operating system has halted.
> >Please press any key to reboot.
> >
> >
> >Without the ethernet card, it boots fine. Then, if I put the card in
> >at the 'Enter pathname of shell or RETURN for sh:' prompt, it gets
> >detected fine.
> >
> >[goes thru installation fine, booting off floppy drive, did boot
> >wd0a:/bsd]
> >
> >after detecting the NIC it gets:
> >pcmcia1 at pcic0 controller 0 socket 1
> >kernel: page fault trap, code=0
> >Stopped at _strcmp+0xe: movb    0(%eax),%cl
> >ddb> trace
> >_strcmp(e07c6000,e0363140,e04a659c,e07c6600,e0363140) at _strcmp+0xe
> >_pcmcia_submatch(e07c6000,e0363140,e04a659c,e0352305,e036294e) at
> >_pcmcia_submatch+0x33
> >
> >(rest of the trace available if needed).
> >
> >And again, if I boot without the PCMCIA card, it boots fine.
> >
> >  - Jeremie
> 
>