Re: pcmcia-nic and -current

[Felix Kronlage <felix@mad.hazardous.org>]

On Tue, Sep 05, 2000 at 06:11:52PM -0300, Aaron Campbell wrote:

> Could you please provide more detail, like at least the output of dmesg,
> the make/model of your notebook and network card, etc.

I'm sorry that I didn't give those information right away,
stupid me...

Notebook: Siemens Scenic Mobil 710
nic: D-Link 660

The dmesg is attached to the mail. 
I don't know if it cause the problem, but I took my kernel-config file
from 2.7 (the one i created back then, and used it with the 2.8 stuff),
however neither config nor the make proccess did really complain...

tia,
-fkr
OpenBSD 2.8-beta (DANG) #1: Tue Sep  5 11:48:33 CEST 2000
    root@dang:/usr/src/sys/arch/i386/compile/DANG
cpu0: F00F bug workaround installed
cpu0: Intel Pentium/MMX (Tillamook) ("GenuineIntel" 586-class) 234 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
real mem  = 66695168 (65132K)
avail mem = 58789888 (57412K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(69) BIOS, date 12/27/97, BIOS32 rev. 0 @ 0xf56d0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 98%
apm0: AC on, battery charge high
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82439TX System (MTXC)" rev 0x01
pcib0 at pci0 dev 1 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 1 lun 0: <TOSHIBA, CD-ROM XM-1602B, 1132> SCSI0 5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 1
wd0 at pciide0 channel 0 drive 0: <IBM-DTCA-24090>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 3909MB, 7944 cyl, 16 head, 63 sec, 8007552 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
cd0(pciide0:0:1): using PIO mode 0, DMA mode 1 (using DMA data transfers)
pciide0: channel 1 ignored (disabled)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 1 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x01 at pci0 dev 1 function 3 not configured
"Chips and Technologies 65554" rev 0xc2 at pci0 dev 6 function 0 not configured
vendor "Cirrus Logic", unknown product 0x1110 (class bridge, subclass CardBus, rev 0xc1) at pci0 dev 20 function 0 not configured
vendor "Cirrus Logic", unknown product 0x1110 (class bridge, subclass CardBus, rev 0xc1) at pci0 dev 20 function 1 not configured
isa0 at pcib0
isadma0 at isa0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Cirrus PD672X> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: D-Link, DE-660, 118B6603
pcmcia0: Manufacturer code 0x149, product 0x21b
pcmcia0: function 0: network adapter, ccr addr 400 mask b
pcmcia0: function 0, config table entry 32: I/O card; irq mask befc; iomask 5, iospace 0-1f; mwait_required io16 irqlevel
ne3 at pcmcia0 function 0 "D-Link, DE-660, 118B6603" port 0x340/16 irq 3
ne3: address 00:80:c8:bc:74:36
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 9, polling enabled
biomask 4040 netmask 4048 ttymask 52ca
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302