Re: Boot problem on laptop

[Frank Clements <clem@mirage.mine.nu>]

eric jackson wrote:
> 
> On Thu, 16 Nov 2000, Frank Clements wrote:
> 
> > I just installed 2.7 via FTP onto a Dell Latitude LS.  The problem I'm
> > running into is that it starts to boot up and go thru loading the kernel
> > and hangs at one point for ever!!  Here is what I have on the screen:
> >
> > OpenBSD 2.7 (GENERIC) #25: Sat May 13 18:04:26 MDT 2000
> >    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 398 MHz
> > cpu0:FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SIMD
> > real mem = 133738496 (130604K)
> > avail mem = 119422976 (116624K)
> > using 1658 buffers containing 6791168 bytes (6632K) of memory
> > mainbus0 (root)
> > bios0 at mainbus0: AT/286+(65) BIOS, date 03/17/00
> > apm0 at bois0: Power Management spec V1.2
> > apm0: battery life expectancy 42%
> > apm0: AC on, battery charge high, charging
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
> > ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
> > pci1 at ppb0 bus 1
> > "Neomagic Magicgraph NM2200" rev 0x20 at pci1 dev 0 function 0 not
> > configured
> > neo0 at pci1 dev 0 function 1 "Neomagic MagicMedia 256AV" rev 0x20: irq
> > 10
> >
> > -- That's where it dies... Anyone else encounter this?  I looked in the
> > bugs archive and there where two or three posts about the same problem
> > but no reply.  And nothing at all about this in the misc archives.  Any
> > help would be great!!
> 
> To see a little closer on where it might be hanging boot it in verbose
> mode.
> 
> boot -c
> 
> UKC> verbose
> verbose enabled
> UKC> quit
> 
> and you will get more info than you ever wanted :). As its not really
> hanging on neo.
> 
>                         Eric
> 
> >
> > TIA,
> >  Frank
> >
> > --
> > "Me fail english?  That unpossible!!"
> >               -- Ralph Wiggum
> >
> >
I tried that... and the last two lines are now:
>> neo probe won
neo0 at pci1 dev 0 function 1 "Neomagic MagicMedia 256AV" rev 0x20: irq
10

Then it hangs.  Any other suggestions?

-Frank

-- 
"Me fail english?  That unpossible!!"
		-- Ralph Wiggum