[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Boot problem on laptop
> >
> > To see a little closer on where it might be hanging boot it in verbose
> > mode.
> >
> > boot -c
> >
> > UKC> verbose
> > verbose enabled
> > UKC> quit
> >
> > and you will get more info than you ever wanted :). As its not really
> > hanging on neo.
> >
> > Eric
> >
> > >
> > >
> I tried that... and the last two lines are now:
> >> neo probe won
> neo0 at pci1 dev 0 function 1 "Neomagic MagicMedia 256AV" rev 0x20: irq
> 10
>
> Then it hangs. Any other suggestions?
>
> -Frank
>
> --
> "Me fail english? That unpossible!!"
> -- Ralph Wiggum
I got it to boot up... at boot I went into boot -c and disabled neo* Now
here is the copy of that dmesg. The second line that has "Neomagic
MagicMedia 256AV" is where it was hanging before.
OpenBSD 2.7 (GENERIC) #25: Sat May 13 18:04:26 MDT 2000
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 398 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX
,FXSR,SIMD
real mem = 133738496 (130604K)
avail mem = 119422976 (116624K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
User Kernel Config
UKC> disable neo)\^H \^H*
42 neo* disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(65) BIOS, date 03/17/00
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 99%
apm0: AC on, battery charge high
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x03
pci1 at ppb0 bus 1
"Neomagic Magicgraph NM2200" rev 0x20 at pci1 dev 0 function 0 not
configured
"Neomagic MagicMedia 256AV" rev 0x20 at pci1 dev 0 function 1 not
configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01:
DMA, chan
nel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHK2060AT>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 5729MB, 12416 cyl, 15 head, 63 sec, 11733120
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not
configured
"Intel 82371AB Power Management (PIIX4)" rev 0x03 at pci0 dev 7 function
3 not c
onfigured
"Texas Instruments PCI1211 PCI-CardBus" rev 0x00 at pci0 dev 10 function
0 not c
onfigured
xl0 at pci0 dev 13 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 10
address
00:b0:d0:4d:3d:cb
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 7
vendor "AT&T/Lucent", unknown product 0x448 (class communications,
subclass misc
ellaneous, rev 0x01) at pci0 dev 16 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 2> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 9
biomask 4040 netmask 4440 ttymask 56c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
"Me fail english? That unpossible!!"
-- Ralph Wiggum