USB & Video driverless on Compaq iPAQ PC ???

["Pete Vickers" <pete.vickers@uk.adtranz.com>]

Hi All,

I'm using OpenBSD 2.8 w/GENERIC kernel on a Compaq iPAQ PC which appears to
utilise a chipset/motherboard "Intel 82801AA", incorporating the following:

Intel 82810E Graphics ...not configured
Intel 82801AA Hub-to-PCI  ...good
Intel 82801AA LPC Interface ...good
Intel 82801AA IDE ...good
Intel 82801AA USB   ...not configured
Intel 82801AA AC-97 Audio ...good :-)

ref: http://www5.compaq.com/products/internetdevices/iPAQ_Desktop.html
I'm currently using the 'legacy lite' model with PS/2 keyb & mouse, since
there's no OpenBSD support for USB console yet ?

Is there any chance of support either of these in the near future ? I'm willing
to build/test any new kernels/configs, but my C programming sucks :-(


Also I'm interest in authenticating users against a Win2k active directory,
therefore I believe I require Kerberos v5 support. I can only find information
regarding version 4 on the OpenBSD www site. Is it possible to use v5 on
OpenBSD, or would this require too much tweaking ? maybe a few tweaks and a
rebuild of the relevant bins ? any info / pointers to relevant info on www
greatly appreciated.


finally thanx for the great o/s ...makes it easiler to sleep @ night.

Pete


for info, dmesg.boot:
--------------------------------------------------------------------------
OpenBSD 2.8 (GENERIC) #399: Mon Nov  6 10:59:23 MST 2000
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II (Celeron) ("GenuineIntel" 686-class, 128KB L2 cache) 498
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 132755456 (129644K)
avail mem = 118079488 (115312K)
using 1646 buffers containing 6742016 bytes (6584K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(0d) BIOS, date 01/13/99, BIOS32 rev. 0 @ 0xeca00
pcibios0 at bios0: rev. 2.1 found at 0xeca00[0x3600]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfe740, size 96 bytes (4
entries)
pcibios0: PCI Interrupt Router at 000:31:0
pcibios0: PCI bus #1 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810E" rev 0x03: rng active, 8Kb/sec
"Intel 82810E Graphics" rev 0x03 at pci0 dev 1 function 0 not configured
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
fxp0 at pci1 dev 1 function 0 "Intel 82557" rev 0x08: irq 11, address
00:d0:b7:86:2a:df
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
pcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC Interface" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST34313A>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wd0: 32-sector PIO, LBA, 4112MB, 8912 cyl, 15 head, 63 sec, 8421840 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (using DMA data transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LS-120 SLIM4  AD, C931> SCSI0 0/direct
removable
sd0: drive offline
sd0: can use 32-bit, PIO mode 0
pciide0: channel 1 interrupting at irq 15
sd0(pciide0:1:0): using PIO mode 3
"Intel 82801AA USB" rev 0x02 at pci0 dev 31 function 2 not configured
ich0 at pci0 dev 31 function 5 "Intel 82801AA AC-97 Audio" rev 0x02 irq 11: ICH0
 AC97
ac97: codec id 0x41445340 (Analog Devices AD1881)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at ich0
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask c040 netmask c840 ttymask d8c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302