Re: Compaq ML350 & OpenBSD 2.8 problems

[Brad <brad@comstyle.com>]

An initial port of the cac driver from NetBSD was done by mickey@ and has
been commited to -current. It still isn't in a 100% functioning state and
still needs some testing *hint* *hint* =) Im not sure if the 431 is
supported by the driver but my initial testing of the driver was done with
a SMART2/P and I plan on eventually trying it out with a 221 (1850R) and
the Integrated controller (DL380).

// Brad

brad@comstyle.com
brad@openbsd.org

>Hi there,
>
>while trying to install OpenBSD 2.8 from CD-ROM on a Compaq Proliant
>ML350, my hard drives are not detected. The box features a Compaq Smart
>Array 431 (supported by cac) & Symbios 53c896 chip, a Compaq Netelligent
>NIC & an ATI Mach 64. It has two disks of 9GB plugged to the Smart Array
>Controller. There are some weird -at least for me- messages during boot
>concerning the cache not being configured ...etc.
>
>Have anyone of you encountered such problems or have  any clue about how
>to install my fav' OS on this box ? DMESG from the machine follows.
>TIA.
>
>#################
>OpenBSD 2.8 (RAMDISK_CD) #176: Mon Nov 6 11:07:38 MST 2000
>deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
>cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 795 MHz
>cpu0:
>FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
>real mem = 536457216 (523884K)
>avail mem = 492711936 (481164K)
>using 5689 buffers containing 26927104 bytes (26296K) of memory
>mainbus0 (root)
>bios0 at mainbus0: AT/286+(ab) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xeca00
>pcibios0 at bios0: rev. 2.1 found at 0xeca00[0x3600]
>pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xf71a0, size 144
>bytes (7 entries)
>pcibios0: PCI Interrupt Router at 000:15:0
>pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x1166 product
>0x0200
>pcibios0: Warning, unable to fix up PCI interrupt routing
>pcibios0: PCI bus #1 is the last bus
>pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>pchb0 at pci0 dev 0 function 0 "Reliance Computer CNB20LE Host" rev 0x05
>pchb1 at pci0 dev 0 function 1 "Reliance Computer CNB20LE Host" rev 0x05
>pci1 at pchb1 bus 5
>vendor "DEC", unknown product 0x46 (class mass storage, subclass RAID,
>rev 0x01) at pci1 dev 2 function 0 not configured
>ppb0 at pci0 dev 1 function 0 "DEC DECchip 21152 PCI-PCI" rev 0x03
>pci2 at ppb0 bus 1
>ncr0 at pci2 dev 4 function 0 "Symbios Logic 53c896" rev
>0x07pci_mem_find: expected mem type 00000000, found 00000004
>: ultra2 wide scsi, irq 15
>CACHE TEST FAILED: host wrote 1, ncr read -2147483648.
>CACHE TEST FAILED: ncr wrote 2, host read 1048576.
>CACHE INCORRECTLY CONFIGURED.
>ncr1 at pci2 dev 4 function 1 "Symbios Logic 53c896" rev
>0x07pci_mem_find: expected mem type 00000000, found 00000004
>: ultra2 wide scsi, irq 15
>CACHE TEST FAILED: host wrote 1, ncr read 21765.
>CACHE TEST FAILED: ncr wrote 2, host read 4096.
>CACHE INCORRECTLY CONFIGURED.
>fxp0 at pci2 dev 5 function 0 "Intel 82557" rev 0x08: irq 11, address
>00:50:8b:e7:a3:bc
>inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
>"ATI Mach64 GV" rev 0x7a at pci2 dev 6 function 0 not configured
>"Compaq Netelligent ASMC" rev 0x00 at pci2 dev 7 function 0 not configured
>"Reliance Computer ROSB4 SouthBridge" rev 0x4f at pci0 dev 15 function 0
>not configured
>pciide0 at pci0 dev 15 function 1 "Reliance Computer IDE" rev 0x00: DMA
>(unsupported), channel 0 configured to compatibility, channel 1
>configured to compatibility
>pciide0: channel 0 interrupting at irq 14
>atapiscsi0 at pciide0 channel 0
>scsibus0 at atapiscsi0: 2 targets
>cd0 at scsibus0 targ 0 lun 0: <COMPAQ, CRD-8402B, 1.03> SCSI0 5/cdrom
>removable
>cd0: can use 16-bit, PIO mode 4
>pciide0: channel 1 ignored (not responding; disabled or no drives?)
>isa0 at mainbus0
>isadma0 at isa0
>npx0 at isa0 port 0xf0/16: using exception 16
>pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
>fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>biomask c040 netmask c840 ttymask c842
>rd0: fixed, 3560 blocks
>rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
>################
>
>--
>Saad Kadhi -- Network & Security Engineer
>-----------------------------------------
>perl -e 'print ($myself=pack(c2,unpack(c,EOF)-3,(((hex(0x666)/6)-666)/2)-66+4),
>pack(c3,((int(exp(666)/10e287)+int(log(666)*2))*2)+10,int(crypt(ski,72)),oct(12)));'
>nodisclaimer