RE: Hang during first boot after install

["Ross, Chris" <cross@wcasd.k12.pa.us>]

	I hadn't noticed that.  After booting in kernel config mode and
disabling pcibios, the problem persists.  It gets to:

root on wd0a
rootdev=0x0  rrootdev=0x300  raw=0x302

and continues to hang.

		Chris

-----Original Message-----
From: Nick Holland [mailto:nick@holland-consulting.net]
Sent: Sunday, January 14, 2001 6:18 AM
To: Ross, Chris; Misc @OpenBSD
Subject: Re: Hang during first boot after install


Have you tried:
  http://www.openbsd.org/errata.html#pcibios
?

I note pcibios is still enabled in your kernel config.

Nick.

"Ross, Chris" wrote:
> 
>         I am attempting to install OBSD on a HP Vectra VL6 series 7 to do
> some software testing.  When the box was booted from the floppy28.fs and
> floppyC28.fs images, it hung at the end of the kernel load.  The
> floppyB28.fs image ran like a dream and the install ran fine.  (From CD.)
> After boot the generic kernel hung.  I built a pretty stripped down kernel
> at home and that hung too.  Any ideas as to the best way to go at this?
> 
>                                Chris Ross
>                                Network Administrator
> 
> My Kernel config:
<snip>
> bios0   at mainbus0
> apm0    at bios0 flags 0x0000   # flags 0x0101 to force protocol version
1.1
> pcibios0 at bios0 flags 0x0000
<snip>


-- 
http://www.holland-consulting.net/