isapnp soundcard problems

[Lars Hansson <larshansson@yahoo.com>]

I have a problem with my soundcard not being detected
by OpenBSD (2.8). The card is a Avanche Logic 100
(als100) and it is, supposedly, Soundblaster
compatible (sb & sb16, i think). The card is a ISA PNP
card and the only thing I can see in the dmesg is that
isapnp0 timeouts. The card usually uses address 220,
irc 5 and dma 1 and 5 (in Win98).

Cheers
Lars Hansson

dmesg output:
OpenBSD 2.8 (ODIN) #1: Sat Jan 20 23:28:17 GMT 2001
    lars@odin:/usr/src/sys/arch/i386/compile/ODIN
cpu0: Intel Pentium II (Celeron) ("GenuineIntel"
686-class, 128KB L2 cache) 489 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 66695168 (65132K)
avail mem = 58904576 (57524K)
using 839 buffers containing 3436544 bytes (3356K) of
memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(84) BIOS, date 01/28/99,
BIOS32 rev. 0 @ 0xfb310
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0xb78c]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at
0xfddd0, size 144 bytes (7 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel
82371SB (Triton II) PCI-ISA" rev 0x00)
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI bus #1 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP"
rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev
0x03
pci1 at ppb0 bus 1
"S3 Trio3 DX2" rev 0x02 at pci1 dev 0 function 0 not
configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4
ISA" rev 0x02
"Intel 82371AB IDE (PIIX4)" rev 0x01 at pci0 dev 7
function 1 not configured
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7
function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at
pci0 dev 7 function 3 not configured
xl0 at pci0 dev 9 function 0 "3Com 3c905 100Base-TX"
rev 0x00: irq 10 address 00:60:08:90:1b:b1
OUI 0x080017 model 0x0000 rev 1 at xl0 phy 24 not
configured
isa0 at pcib0
isadma0 at isa0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <Maxtor 90340D2>
wd0: can use 16-bit, PIO mode 4
wd0: 16-sector PIO, LBA, 3242MB, 6588 cyl, 16 head, 63
sec, 6640704 sectors
wd1 at wdc0 channel 0 drive 1: <ST317221A>
wd1: can use 16-bit, PIO mode 4
wd1: 2-sector PIO, LBA, 16446MB, 16383 cyl, 16 head,
63 sec, 33683328 sectors
wdc1 at isa0 port 0x170/8 irq 15
atapiscsi0 at wdc1 channel 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <36X MAX, ATAPI CD-ROM,
UA01> SCSI0 5/cdrom removable
cd0: can use 16-bit, PIO mode 4
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte
fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8
scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
isapnp0: Resource timeout, card 1
biomask c040 netmask c440 ttymask d4c2
pctr: 686-class user-level performance counters
enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
wd1: no disk label
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302


__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices. 
http://auctions.yahoo.com/