[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: strange crash on 2.8
Diego Giagio wrote:
>
> I have the same problem .. may it be a corrupt hard drive ?
>
> ----- Original Message -----
> From: "Frank Clements" <clem@mirage.mine.nu>
> To: <misc@openbsd.org>
> Sent: Tuesday, January 30, 2001 1:45 PM
> Subject: strange crash on 2.8
>
> > I just installed a diamond fireport scsi card along with a 1Gb jaz and
> > scsi cdrom. The system ran fine but after I let it sit for an hour it
> > locked up hard, and these messages are in my syslog:
> >
> > Jan 30 03:58:23 mirage /bsd: wd0(pciide0:0:0): timeout
> > Jan 30 04:04:03 mirage /bsd: type: ata
> > Jan 30 04:06:03 mirage /bsd: c_bcount: 8192
> > Jan 30 04:14:13 mirage /bsd: c_skip: 0
> > Jan 30 04:17:13 mirage /bsd: wd0(pciide0:0:0): timeout
> > Jan 30 04:18:43 mirage /bsd: type: ata
> > Jan 30 04:19:43 mirage /bsd: c_bcount: 8192
> > Jan 30 04:27:23 mirage /bsd: c_skip: 0
> > Jan 30 04:28:53 mirage /bsd: wd0(pciide0:0:0): timeout
> > Jan 30 04:31:23 mirage /bsd: type: ata
> > Jan 30 04:37:43 mirage /bsd: c_bcount: 8192
> > Jan 30 04:41:13 mirage /bsd: c_skip: 0
> >
> > I'm running OpenBSD mirage 2.8 GENERIC#399 i386. Any suggestion as to
> > what may have caused this? I didn't try taking out the scsi card
> > yet.... I guess that's the next step.
> >
> > Thanks for any help!!
> >
> > Frank
> >
> > DMESG:
> > OpenBSD 2.8 (GENERIC) #399: Mon Nov 6 10:59:23 MST 2000
> > deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel Pentium II (Celeron) ("GenuineIntel" 686-class, 128KB L2
> > cache) 501 MHz
> > cpu0:
> >
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
> FXSR
> > real mem = 133804032 (130668K)
> > avail mem = 119054336 (116264K)
> > using 1658 buffers containing 6791168 bytes (6632K) of memory
> > mainbus0 (root)
> > bios0 at mainbus0: AT/286+(c9) BIOS, date 11/03/99, BIOS32 rev. 0 @
> > 0xfb410
> > apm0 at bios0: Power Management spec V1.2
> > apm0: AC on, battery charge unknown
> > pcibios0 at bios0: rev. 2.1 found at 0xf0000[0xb898]
> > pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfdef0, size 160
> > bytes (8 entries)
> > pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB (Triton II)
> > PCI-ISA" rev 0x00)
> > pcibios0: PCI Exclusive IRQs: 5 9 10 11
> > pcibios0: PCI bus #1 is the last bus
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
> > ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> > pci1 at ppb0 bus 1
> > "ATI Rage Magnum" rev 0x00 at pci1 dev 0 function 0 not configured
> > pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01:
> > DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> > wd0 at pciide0 channel 0 drive 0: <Maxtor 52049U4>
> > wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> > wd0: 16-sector PIO, LBA, 19541MB, 16383 cyl, 16 head, 63 sec, 40020624
> > sectors
> > pciide0: channel 0 interrupting at irq 14
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
> > transfers)
> > atapiscsi0 at pciide0 channel 1
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <CREATIVE, CD5233E, 1.00> SCSI0 5/cdrom
> > removable
> > cd0: can use 32-bit, PIO mode 4, DMA mode 2
> > pciide0: channel 1 interrupting at irq 15
> > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data
> > transfers)
> > "Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not
> > configured
> > "Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function
> > 3 not configured
> > dc0 at pci0 dev 9 function 0 "Lite-On PNIC" rev 0x20: irq 10 address
> > 00:a0:cc:5b:62:b7
> > ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
> > ukphy0: OUI 0x001018, model 0x0021, rev. 2
> > eap0 at pci0 dev 13 function 0 "Ensoniq AudioPCI97" rev 0x07: irq 9
> > ac97: codec id 0x83847608 (SigmaTel STAC9708)
> > ac97: codec features 18 bit DAC, 18 bit ADC, Rockwell 3D
> > audio0 at eap0
> > fxp0 at pci0 dev 15 function 0 "Intel 82557" rev 0x08: irq 5, address
> > 00:d0:b7:6a:dd:4e
> > inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
> > ncr0 at pci0 dev 17 function 0 "Symbios Logic 53c875J" rev 0x04: ultra
> > wide scsi, irq 10
> > scsibus1 at ncr0: 16 targets
> > cd1 at scsibus1 targ 3 lun 0: <CyberDrv, CD-ROM TW240S, 1.20> SCSI2
> > 5/cdrom removable
> > sd0 at scsibus1 targ 4 lun 0: <iomega, jaz 1GB, J.86> SCSI2 0/direct
> > removable
> > sd0(ncr0:4:0): 10.0 MB/s (100 ns, offset 15)
> > sd0: drive offline
> > "Triones Technologies HPT366/370 EIDE" rev 0x01 at pci0 dev 19 function
> > 0 not configured
> > "Triones Technologies HPT366/370 EIDE" rev 0x01 at pci0 dev 19 function
> > 1 not configured
> > isa0 at pcib0
> > isadma0 at isa0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > sysbeep0 at pcppi0
> > lpt2 at isa0 port 0x3bc/4: polled
> > npx0 at isa0 port 0xf0/16: using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
> > pms0 at vt0 irq 12
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > biomask c440 netmask c460 ttymask d462
> > pctr: 686-class user-level performance counters enabled
> > mtrr: Pentium Pro MTRR support
> > dkcsum: wd0 matched BIOS disk 80
> > root on wd0a
> > rootdev=0x0 rrootdev=0x300 rawdev=0x302
> > WARNING: / was not properly unmounted
> >
> > --
> > "Me fail english? That unpossible!!"
> > -- Ralph Wiggum
> >
> >
I don't think so.. I disabled ncr* at boot and now it's fine.
Frank
--
"Me fail english? That unpossible!!"
-- Ralph Wiggum