Re: your mail

[jolan <jolan@enteract.com>]

The cdrecord port is kind of busted. Actually it's just cdrecord's BSD
support that's busted. Try cdrecord dev=0,1,0 -scanbus. All commands are
required to pass dev= since auto detection of devices is broken. I'm not
sure how accurate information this is because I don't have my CD-RW on my
OpenBSD box right now. Let me know if this helps out at all. I remember I
had to quite a lot of messing around to get it to work.

-Jolan

On Fri, 9 Feb 2001, Marek Roszkowski wrote:

> Hi all
> 
> today, when i was trying to burn some cd's on my scsi recorder and i found
> that errors:
> 
> kraweznik# cdrecord -scanbus
> Cdrecord 1.9 (i386-unknown-openbsd2.8) Copyright (C) 1995-2000 Jörg Schilling
> ./cdrecord: No such file or directory. Cannot open SCSI driver.
> ./cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
> 
> here is my dmesg:
> 
> OpenBSD 2.8-current (GENERIC) #514: Wed Feb  7 07:12:05 MST 2001
>     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: F00F bug workaround installed
> cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 120 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
> real mem  = 33140736 (32364K)
> avail mem = 25575424 (24976K)
> using 430 buffers containing 1761280 bytes (1720K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(43) BIOS, date 01/13/96, BIOS32 rev. 0 @ 0xfb150
> apm0 at bios0: Power Management spec V1.1
> apm0: AC on, battery charge unknown, estimated 0:00 hours
> pcibios0 at bios0: rev. 2.1 found at 0xf0000[0xb668]
> pcibios0: PCI BIOS has 5 Interrupt Routing table entries
> pcibios0: PCI bus #0 is the last bus
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82437FX (Triton)" rev 0x02
> pcib0 at pci0 dev 7 function 0 "Intel 82371FB (Triton) PCI-ISA" rev 0x02
> pciide0 at pci0 dev 7 function 1 "Intel 82371FB (Triton) IDE" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <ST3660A>
> wd0: 16-sector PIO, LBA, 520MB, 1057 cyl, 16 head, 63 sec, 1065456 sectors
> pciide0: channel 0 interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 0, DMA mode 1
> atapiscsi0 at pciide0 channel 1
> scsibus0 at atapiscsi0: 2 targets
> pciide0:1:1: IDENTIFY timed out
> cd0 at scsibus0 targ 1 lun 0: <HITACHI, CDR-7830, 2013> SCSI0 5/cdrom removable
> wd1 at pciide0 channel 1 drive 0: <Seagate Technology 1275MB - ST31276A>
> wd1: 16-sector PIO, LBA, 1221MB, 2482 cyl, 16 head, 63 sec, 2502308 sectors
> pciide0: channel 1 interrupting at irq 15
> wd1(pciide0:1:0): using PIO mode 0, DMA mode 1
> cd0(pciide0:1:1): using PIO mode 0, DMA mode 1
> vga1 at pci0 dev 17 function 0 "S3 Trio32/64" rev 0x00
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> fxp0 at pci0 dev 18 function 0 "Intel 82557" rev 0x05: irq 11, address 00:90:27:12:33:1e
> inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
> adv0 at pci0 dev 19 function 0 "Advansys ABP-930/40UA" rev 0x03: irq 10
> scsibus1 at adv0: 7 targets
> cd1 at scsibus1 targ 3 lun 0: <YAMAHA, CRW8824S, 1.00> SCSI2 5/cdrom removable
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> isapnp0 at isa0 port 0x279: read port 0x203
> ym0 at isapnp0 "OPL3-SAX Sound Board, YMH0021, , " port 0x220/16,0x530/8,0x388/4,0x330/2,0x370/2 irq 5 drq 0,1
> midi1 at ym0: <YM MPU-401 UART>
> audio0 at ym0
> joy0 at isapnp0 "OPL3-SAX Sound Board, YMH0022, PNPB02F, " port 0x201/1
> biomask c440 netmask cc40 ttymask ccc2
> pctr: 586-class performance counters and user-level cycle counter enabled
> wd0: no disk label
> dkcsum: wd0 matched BIOS disk 80
> dkcsum: wd1 matched BIOS disk 81
> root on wd1a
> rootdev=0x10 rrootdev=0x310 rawdev=0x312
> 
> 
> greetings
> M.
> 
> 
>