Re: Network is giving me a huge headache...please help :)

[bsdmail <bsdmail@leweb.ath.cx>]

# /sbin/dmesg
OpenBSD 2.8 (GENERIC) #0: Sat Mar 31 19:11:27 GMT 2001
    root@ct58186-a:/sys/arch/i386/compile/GENERIC
cpu0: Cyrix 6x86MX (M2) ("CyrixInstead" 686-class) 251 MHz
cpu0: FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX
real mem  = 268021760 (261740K)
avail mem = 243503104 (237796K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/26/99, BIOS32 rev. 0 @
0xfdb10
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x10000]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xf8120, size 80 bytes
(3 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C586 (Apollo VP)
PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C598 (Apollo MVP3) Host-PCI" rev
0x04
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 (Apollo MVP3) PCI-AGP" rev
0x00
pci1 at ppb0 bus 1
"ATI Mach64 GW" rev 0x7a at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "VIA VT82C596A (Apollo Pro) PCI-ISA" rev
0x06
pciide0 at pci0 dev 7 function 1 "VIA VT82C586A IDE" rev 0x06: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 54098H8>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 39082MB, 16383 cyl, 16 head, 63 sec, 80041248
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
"VIA VT83C572 USB" rev 0x02 at pci0 dev 7 function 2 not configured
"VIA VT82C596 Power Management" rev 0x00 at pci0 dev 7 function 3 not
configured
dc0 at pci0 dev 18 function 0 "Lite-On PNIC" rev 0x20: irq 10 address
00:a0:cc:5f:f6:9a
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0021, rev. 2
xl0 at pci0 dev 19 function 0 "3Com 3c905B 100Base-TX" rev 0x34: irq 11
address 00:50:da:bc:94:16
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
wss1 at isapnp0 "Crystal CS4235, CSC0000, , WSS/SB" port
0x534/4,0x388/4,0x220/16 irq 5 drq 1,0: CS4236/CS4236B (vers 0)
audio0 at wss1
joy0 at isapnp0 "Crystal CS4235, CSC0001, , GAME" port 0x200/8
"Crystal CS4235, CSC0010, , CTRL" at isapnp0 port 0x120/8 not configured
mpu0 at isapnp0 "Crystal CS4235, CSC0003, , MPU" port 0x330/2 irq 9
mpu0: find failed
biomask 4040 netmask 4c40 ttymask 5cc2
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
rtinit: wrong ifa (0xe0cd8f80) was (0xe0c2a380)

On Mon, 2 Apr 2001, Aaron Campbell wrote:

> On Mon, 2 Apr 2001, bsdmail wrote:
>
> > messing up.  I have 2 Different type of NIC's in the firewall/gateway
> > (duh) 1 is dc0 and the other is xl0.  I thought maybe part of the problem
>
> Please provide the complete output from /sbin/dmesg (how many times per
> week must we tell people this?)
>
> I wonder if you also have an ADMtek AN983-based dc NIC, which I have
> gathered aren't working so well as of late (will investigate soon).
>
> ---
> Aaron Campbell (aaron@monkey.org || aaron@openbsd.org)
> http://www.monkey.org/~aaron
>
>