Kernel lockup -current

[InSaNe <root@207-195-220-014.sihope.com>]

I run -current kernel from June 21's, it's GENERIC with the only options 
added being:

option  NMBCLUSTERS=8192
option  NKMEMCLUSTERS=8192

Today(Sunday July 1st) I CVS'd and compiled -current kernel again, during 
boot it hangs at:

scsibus0 at atapiscsi0: 2 targets

here is my dmesg:
OpenBSD 2.9-current (GENERIC) #0: Thu Jun 21 00:41:41 CDT 2001
    root@lucy:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD K6-2 ("AuthenticAMD" 586-class) 401 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem  = 133804032 (130668K)
avail mem = 118636544 (115856K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(02) BIOS, date 12/29/98, BIOS32 rev. 0 @ 0xfb460
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb8dc
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdda0/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C586 PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C597 Host-PCI" rev 0x04
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "3DFX Interactive Banshee" rev 0x03
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C586 PCI-ISA" rev 0x41
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 91080D5>
wd0: 16-sector PIO, LBA, 10300MB, 16383 cyl, 16 head, 63 sec, 21095424 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 91000D5>
wd1: 16-sector PIO, LBA, 9541MB, 16383 cyl, 16 head, 63 sec, 19541088 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <CD-ROM, Drive/F5A, B1.5> SCSI0 5/cdrom removable
cd1 at scsibus0 targ 1 lun 0: <CREATIVE, CD-RW RW8435E, BC03> SCSI0 5/cdrom removable
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 3 "VIA VT82C586 Power Mgmt" rev 0x10
de0 at pci0 dev 8 function 0 "DEC 21041" rev 0x21: irq 10
de0: Asante 21041 [10Mb/s] pass 2.1 address 00:00:94:98:a1:98
eap0 at pci0 dev 9 function 0 "Ensoniq AudioPCI" rev 0x01: irq 12
audio0 at eap0
fxp0 at pci0 dev 10 function 0 "Intel 82557" rev 0x08: irq 5, address 00:03:47:09:ef:93
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
vendor "LuxSonor", unknown product 0x1e (class multimedia, subclass video, rev 0x02) at pci0 dev 11 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
de0: enabling 10baseT port
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c840 netmask cc60 ttymask cce2
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matched BIOS disk 81
dkcsum: wd1 matched BIOS disk 80
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312