RE: PPP Stalls - Sorry

["Edward Chainsaw" <mrchainsaw@onemain.com>]

> You don't say what version of OpenBSD you are running so I'm going
> to assume 2.9.  If not, then the path MTU thing does not apply...
>
> That sure sounds like an MTU problem.  I would suggest using the
> default MTU (1500) and try disabling path MTU discovery to see
> is that makes any difference.  In /etc/sysctl.conf
>    net.inet.ip.mtudisc=0
>
> Or from the shell:
>    sysctl -w net.inet.ip.mtudisc=0
>
>  - todd

 I'm running 2.8 from the cd, sorry. I tried 1500 MTU and disabling
discovery, no effect. Ideas? I'm grasping at straws now.

Thanks.

> That sounds like a buffer over/under-flow.  I take it this didn't happen
> witha different O.S. on the same hardware?  A lot of serial-port based TAs
> like the OfficeConnects are Wind0z3-centric (i.e, you can only access the
> hardware configuration tools via a window application)
>
>--lava

Yes this TA works fine in windows. I set up the SPIDs, etc with an
autoconfig
windows program. The software was clunky, but it worked. I'm pretty sure it
can be set up manually with AT commands - that's what I'm researching now.
Anything in particular I should be looking for?

Its a 3Com ISDN Pro TA, model no. 3CP3468A.