[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Netgear FA510C

Hi,

I have a Netgear FA510c here:

| dc0 at cardbus0 dev 0 function 0 irq 11 address 00:10:7a:60:f7:1a
| dcphy0 at dc0 phy 31: internal PHY


ifconfig says:

| dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
|      media: Ethernet none (100baseTX)
|      status: no carrier
|      inet 192.168.1.62 netmask 0xffffff00 broadcast 192.168.1.255
|      inet6 fe80::210:7aff:fe60:f71a%dc0 prefixlen 64 scopeid 0x11

doesn't matter wether I use 10baseT or 100baseTX as a media-type
(same with full-duplex, half-duplex) I always get the 'status: no 
carrier'.

| dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
|      media: Ethernet 100baseTX full-duplex
|      status: no carrier

The other side of the cable is attached to a Netgear 10/100 switch.
The cable to the switch (and the port at the switch) are fine, since
they work with other NIC's.

The GENERIC-kernel/userland used is from 2.9-release.

any hints?

-fkr
-- 
gpg-fingerprint: 076E 1E87 3E05 1C7F B1A0  8A48 0D31 9BD3 D9AC 74D0 
  |http://www.hazardous.org/ | whois -h whois.ripe.de FKR-RIPE  |
  |all your base are belong to us  |  shame on me  | fkr@IRCnet |