[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Laptop PCMCIA question

To: mickey@lucifier.net
Subject: Re: Laptop PCMCIA question
From: "J.C. Roberts" <unknown@abac.com>
Date: Sat, 15 Sep 2001 09:49:31 -0700
Cc: misc@openbsd.org
Organization: None
References: <vjp6qtkena4urtipfv6aese3udva4e8c9d@4ax.com> <200109151525.f8FFP6gA017957@lucifier.net>
On Sat, 15 Sep 2001 11:25:06 -0400 (EDT), you wrote:
>Making, drinking tea and reading an opus magnum from J.C. Roberts:
>> On Sat, 15 Sep 2001 02:13:47 -0500, you wrote:
>> 
>> >I upgraded to OpenBSD 3.0 Beta in hopes that the PCMCIA slots would be
>> >supported. I booted from the floppy and it seemed that it was detected;
>> >it even detected the Aironet card in it. However, when I booted after
>> >the install I got the old dmesg I am used to seeing:
>> >
>> >cbb0 at pci1 dev 2 function 0 "Ricoh 5C476 PCI-CardBus" rev
>> >0x80pci_intr_map: no mapping for pin A
>> >: couldn't map interrupt
>> >cbb1 at pci1 dev 2 function 1 "Ricoh 5C476 PCI-CardBus" rev
>> >0x80pci_intr_map: no mapping for pin B
>> >: couldn't map interrupt
>> >
>> >I know that the new 3.0 BETA kernel is being loaded because I see :
>> >OpenBSD 3.0-beta (GENERIC) #50: Tue Sep 11 08:59:29 MDT 2001
>> >    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>> >
>> >The laptop is a Sony Vaio PCG FX 150. Does anyone know how I can fix
>> >this?
>> 
>> 
>> I've got 2.9-STABLE on a Toshiba Satellite Pro 4260-DVD and have been
>> getting a similar dmesg since day one but the card slots do work
>> perfectly with the 3Com 3CXFE574BT NIC I've got in there. It's the
>> only card I own, so I'm not sure how much help I can be.
>> 
>> ---- dmesg snippet ----
>> cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC100 PCI-CardBus" rev
>> 0x20pci_intr_map: no mapping for pin A
>> : couldn't map interrupt
>> cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC100 PCI-CardBus" rev
>> 0x20pci_intr_map: no mapping for pin B
>> : couldn't map interrupt
>> ----
>> 
>> cbb(4) doesn't even mention supporting the ep network driver that the
>> 3com card uses but it still works ?
>> 
>> Since I'm getting a _real_ similar dmesg as you and my card is working
>> perfectly, are you sure the problem is you're having is really in the
>> cardbus support?
>
>would it be too much to ask you to post full dmesg all the time?


In this case, I was just trying to show the similarity between the two
but sure, I'll post the full thing from now on. 

Sorry this took a while but I had to build GENERIC again, so the dmesg
would be (more) useful.


>i would greatly appreciate if you read the http://www.openbsd.org/report.html .
>
>cu

Since the one card on the cardbus works perfectly, I thought this was
an "informational message" rather than a bug or I would have already
reported it. ;-)


Best Regards,
JCR


---- dmesg ----
 done
rebooting...
OpenBSD 2.9-stable (GENERIC) #0: Sat Jun 23 11:57:04 PDT 2001
    fishbyte@Z:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 448
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 334999552 (327148K)
avail mem = 305307648 (298152K)
using 4114 buffers containing 16850944 bytes (16456K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 12/30/99
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 2:03 hours
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000 0xe8000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x11
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DCXA-210000>
wd0: 16-sector PIO, LBA, 9590MB, 16383 cyl, 16 head, 63 sec, 19640880
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2302, 1315> SCSI0
5/cdrom removable
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Management" rev 0x03 at pci0 dev 5 function 3 not
configured
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 7 function 0 not configured
vendor "Toshiba", unknown product 0xd01 (unknown class 0x0d, subclass
0x00, rev 0x00) at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC100 PCI-CardBus" rev
0x20pci_intr_map: no mapping for pin A
: couldn't map interrupt
cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC100 PCI-CardBus" rev
0x20pci_intr_map: no mapping for pin B
: couldn't map interrupt
yds0 at pci0 dev 12 function 0 "Yamaha 744" rev 0x02: irq 11
ac97: codec id 0x414b4d02 (Asahi Kasei AK4543)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, AZTECH 3D
audio0 at yds0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns8250, no fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ep1 at pcmcia1 function 0 "3Com, Megahertz 574B, B" port 0x340/32 irq
5: address 00:00:86:51:d0:c0
tqphy0 at ep1 phy 0: 78Q2120 10/100 media interface, rev. 10
pcic0: irq 10, polling enabled
opl0 at yds0: model OPL3
midi1 at opl0: <DS-1 integrated Yamaha OPL3>
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
biomask c840 netmask c860 ttymask dce2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done
rebooting...
OpenBSD 2.9-stable (GENERIC) #0: Sat Sep 15 09:40:25 PDT 2001
    root@Z:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 448
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 334999552 (327148K)
avail mem = 305307648 (298152K)
using 4114 buffers containing 16850944 bytes (16456K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 12/30/99
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 2:10 hours
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000 0xe8000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x11
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DCXA-210000>
wd0: 16-sector PIO, LBA, 9590MB, 16383 cyl, 16 head, 63 sec, 19640880
sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2302, 1315> SCSI0
5/cdrom removable
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Management" rev 0x03 at pci0 dev 5 function 3 not
configured
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 7 function 0 not configured
vendor "Toshiba", unknown product 0xd01 (unknown class 0x0d, subclass
0x00, rev 0x00) at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC100 PCI-CardBus" rev
0x20pci_intr_map: no mapping for pin A
: couldn't map interrupt
cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC100 PCI-CardBus" rev
0x20pci_intr_map: no mapping for pin B
: couldn't map interrupt
yds0 at pci0 dev 12 function 0 "Yamaha 744" rev 0x02: irq 11
ac97: codec id 0x414b4d02 (Asahi Kasei AK4543)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, AZTECH 3D
audio0 at yds0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns8250, no fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ep1 at pcmcia1 function 0 "3Com, Megahertz 574B, B" port 0x340/32 irq
5: address 00:00:86:51:d0:c0
tqphy0 at ep1 phy 0: 78Q2120 10/100 media interface, rev. 10
pcic0: irq 10, polling enabled
opl0 at yds0: model OPL3
midi1 at opl0: <DS-1 integrated Yamaha OPL3>
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
biomask c840 netmask c860 ttymask dce2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

---- end dmesg ----
References:
- Re: Laptop PCMCIA question
  - From: "J.C. Roberts" <unknown@abac.com>
- Re: Laptop PCMCIA question
  - From: Michael Shalayeff <mickey@lucifier.net>
Prev by Date: Re: I18n and localization OpenBSD
Next by Date: make build failure (sources from 15th Sep 2001).
Prev by thread: Re: Laptop PCMCIA question
Next by thread: Re: Laptop PCMCIA question
Index(es):
- Date
- Thread