[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: WEP in Lucent silver card
As far as I can see, you don't have set the WEP keys, so IMHO this won't work
at all. For me it worked (with 2.9 or 3.0 not sure) very fine.
The syntax for setting the WEP keys with wicontrol is a bit confusing, but
before you can see them in the wicontrol output it won't work.
It would help if you post your wicontrol command lines...
Cheers,
Christoph Schneeberger
Clarence wrote:
> Hello,
>
> I just test the WEP option of wicontrol between openbsd-3.0 and
> openbsd-current. The two system are both i386 and similar cannot
> communicate when the WEP is on. I had tested that win98 and OpenBSD-3.0
> can communicate with each other even the WEP is on. Is there a problem of
> openbsd-3.0 and openbsd-current when WEP is on ? Here is my wicontrol
> output of openbsd-3.0 and openbsd-current. Any idea ? Thanks.
>
> Clarence
>
> ======= OpenBSD-3.0 ==========
> NIC serial number: [ 01UT49412530 ]
> Station name: [ private_base ]
> SSID for IBSS creation: [ IBSS ]
> Current netname (SSID): [ private_network ]
> Desired netname (SSID): [ private_network ]
> Current BSSID: [ 02:02:2d:40:67:ea ]
> Channel list: [ 8191 ]
> IBSS channel: [ 3 ]
> Current channel: [ 3 ]
> Comms quality/signal/noise: [ 0 27 27 ]
> Promiscuous mode: [ Off ]
> Port type (1=BSS, 3=ad-hoc): [ 1 ]
> MAC address: [ 00:02:2d:40:67:ea ]
> TX rate (selection): [ 3 ]
> TX rate (actual speed): [ 2 ]
> Maximum data length: [ 2304 ]
> RTS/CTS handshake threshold: [ 2347 ]
> Create IBSS: [ On ]
> Microwave oven robustness: [ 0 ]
> Roaming mode(1:firm,3:disable): [ ]
> Access point density: [ 1 ]
> Power Mgmt (1=on, 0=off): [ 0 ]
> Max sleep time: [ 100 ]
> Card info: [ Lucent, Firmware 7.28 variant 1 ]
> WEP encryption: [ On ]
> Authentication type
> (1=OpenSys, 2=Shared Key): [ ]
> TX encryption key: [ 1 ]
> Encryption keys: [ hello ][ ][ ][ ]
> ===========================================================
>
> ======== openbsd-current ===========
> NIC serial number: [ 01UT49412491 ]
> Station name: [ ibm380xd ]
> SSID for IBSS creation: [ IBSS ]
> Current netname (SSID): [ private_network ]
> Desired netname (SSID): [ private_network ]
> Current BSSID: [ 02:02:2d:40:67:ea ]
> Channel list: [ 8191 ]
> IBSS channel: [ 3 ]
> Current channel: [ 3 ]
> Comms quality/signal/noise: [ 0 27 27 ]
> Promiscuous mode: [ Off ]
> Port type (1=BSS, 3=ad-hoc): [ 1 ]
> MAC address: [ 00:02:2d:40:67:c3 ]
> TX rate (selection): [ 3 ]
> TX rate (actual speed): [ 2 ]
> Maximum data length: [ 2304 ]
> RTS/CTS handshake threshold: [ 2347 ]
> Create IBSS: [ On ]
> Microwave oven robustness: [ 0 ]
> Roaming mode(1:firm,3:disable): [ ]
> Access point density: [ 1 ]
> Power Mgmt (1=on, 0=off): [ 0 ]
> Max sleep time: [ 100 ]
> Card info: [ Lucent, Firmware 7.28 variant 1 ]
> WEP encryption: [ On ]
> Authentication type
> (1=OpenSys, 2=Shared Key): [ ]
> TX encryption key: [ 1 ]
> Encryption keys: [ hello ][ ][ ][ ]
> ========================================================