[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

2.8 sees hard drive; 3.0 doesn't

I have  a pair of Dell  OptiPlex GL 5113 computers  that have been
working great as firewalls with 2.8 for quite a while, now. I want
to upgrade them to 3.0

On one  of them, none  of the  3.0 install floppies  recognize the
hard drive. On the other, all is fine. I've tried all three images
on the  CD, plus the  floppy30.fs from  the latest snapshot  and a
``make  release''  of -stable  done  on  the  28th; if  there's  a
different result among the five disks, I can't see it.

Suggestions most welcome; dmesges below.

Specs for the Dell OptiPlex GL 5113 can be found here:

    http://docs.us.dell.com/docs/dta/stingl/

Thanks,

b&

----8<----bad machine, 3.0 install floppy----8<----
OpenBSD 3.0 (RAMDISK) #77: Thu Oct 18 14:59:23 MDT 2001
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 16367616 (15984K)
avail mem = 11722752 (11448K)
using 225 buffers containing 921600 bytes (900K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/08/96, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.1
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI BIOS has 4 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82437FX" rev 0x02
"Intel 82371FB PCI-ISA" rev 0x02 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 7 function 1 "Intel 82371FB IDE" rev 0x02: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
pciide0: channel 1 ignored (disabled)
dc0 at pci0 dev 12 function 0 "ADMtek AN983" rev 0x11: irq 12 address
00:03:6d:17:b0:b2
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000895, model 0x0001, rev. 0
dc1 at pci0 dev 13 function 0 "ADMtek AN983" rev 0x11: irq 15 address
00:03:6d:17:b0:bc
ukphy1 at dc1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000895, model 0x0001, rev. 0
vga1 at pci0 dev 16 function 0 "S3 Trio32/64" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
ep0 at isa0 port 0x300/16 irq 5: address 00:20:af:dc:c7:c7, utp (default utp)
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 40 netmask 9060 ttymask 9062
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
---->8----bad machine, 3.0 install floppy---->8----

----8<----bad machine, 2.8 install floppy----8<----
OpenBSD 2.8 (RAMDISK) #182: Mon Nov  6 11:13:39 MST 2000
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 16367616 (15984K)
avail mem = 11276288 (11012K)
using 225 buffers containing 921600 bytes (900K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/08/96, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.1
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x10000]
pcibios0: PCI BIOS has 4 Interrupt Routing table entries
pcibios0: PCI bus #0 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82437FX (Triton)" rev 0x02
"Intel 82371FB (Triton) PCI-ISA" rev 0x02 at pci0 dev 7 function 0 not
configured
pciide0 at pci0 dev 7 function 1 "Intel 82371FB (Triton) IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3290A>
wd0: can use 32-bit, PIO mode 0
wd0: 32-sector PIO, CHS, 249MB, 1001 cyl, 15 head, 34 sec, 510510 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 0
pciide0: channel 1 ignored (disabled)
dc0 at pci0 dev 12 function 0 "ADMtek AN983" rev 0x11: irq 12 address
00:03:6d:17:b0:b2
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000895, model 0x0001, rev. 0
dc1 at pci0 dev 13 function 0 "ADMtek AN983" rev 0x11: irq 15 address
00:03:6d:17:b0:bc
ukphy1 at dc1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000895, model 0x0001, rev. 0
"S3 Trio32/64" rev 0x00 at pci0 dev 16 function 0 not configured
isa0 at mainbus0
isadma0 at isa0
ep0 at isa0 port 0x300/16 irq 5: address 00:20:af:dc:c7:c7, utp (default utp)
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, mono, 8 scr, mf2-kbd
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask d060 ttymask d062
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
---->8----bad machine, 2.8 install floppy---->8----

----8<----good machine, 3.0 install floppy----8<----
OpenBSD 3.0 (RAMDISK) #77: Thu Oct 18 14:59:23 MDT 2001
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 16367616 (15984K)
avail mem = 11722752 (11448K)
using 225 buffers containing 921600 bytes (900K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/21/97, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.1
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI BIOS has 4 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82437FX" rev 0x02
"Intel 82371FB PCI-ISA" rev 0x02 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 7 function 1 "Intel 82371FB IDE" rev 0x02: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC AC2850F>
wd0: 16-sector PIO, LBA, 814MB, 1654 cyl, 16 head, 63 sec, 1667232 sectors
wd0(pciide0:0:0): using PIO mode 0, DMA mode 1
pciide0: channel 1 ignored (disabled)
dc0 at pci0 dev 12 function 0 "ADMtek AN983" rev 0x11: irq 11 address
00:20:78:03:a4:f1
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000895, model 0x0001, rev. 0
dc1 at pci0 dev 13 function 0 "ADMtek AN983" rev 0x11: irq 10 address
00:20:78:03:a5:4d
ukphy1 at dc1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000895, model 0x0001, rev. 0
vga1 at pci0 dev 16 function 0 "S3 Trio32/64" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4c40 ttymask 4c42
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
---->8----good machine, 3.0 install floppy---->8----

----8<----good machine, 2.8 install floppy----8<----
OpenBSD 2.8 (RAMDISK) #182: Mon Nov  6 11:13:39 MST 2000
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 133 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 16367616 (15984K)
avail mem = 11276288 (11012K)
using 225 buffers containing 921600 bytes (900K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/21/97, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.1
pcibios0 at bios0: rev. 2.1 found at 0xf0000[0x10000]
pcibios0: PCI BIOS has 4 Interrupt Routing table entries
pcibios0: PCI bus #0 is the last bus
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82437FX (Triton)" rev 0x02
"Intel 82371FB (Triton) PCI-ISA" rev 0x02 at pci0 dev 7 function 0 not
configured
pciide0 at pci0 dev 7 function 1 "Intel 82371FB (Triton) IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC AC2850F>
wd0: can use 32-bit, PIO mode 3, DMA mode 1
wd0: 16-sector PIO, LBA, 814MB, 1654 cyl, 16 head, 63 sec, 1667232 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 0, DMA mode 1 (using DMA data transfers)
pciide0: channel 1 ignored (disabled)
dc0 at pci0 dev 12 function 0 "ADMtek AN983" rev 0x11: irq 11 address
00:20:78:03:a4:f1
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000895, model 0x0001, rev. 0
dc1 at pci0 dev 13 function 0 "ADMtek AN983" rev 0x11: irq 10 address
00:20:78:03:a5:4d
ukphy1 at dc1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000895, model 0x0001, rev. 0
"S3 Trio32/64" rev 0x00 at pci0 dev 16 function 0 not configured
isa0 at mainbus0
isadma0 at isa0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4040 netmask 4c40 ttymask 4c42
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
---->8----good machine, 2.8 install floppy---->8----

--
Ben Goren
 mailto:ben@trumpetpower.com
 http://www.trumpetpower.com/
 icbm:33o25'37"N_111o57'32"W

[demime 0.98d removed an attachment of type application/pgp-signature]