[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Fwd: wi0,d-link dwl-650 w/ pci bridge, airport, ping stops

To: <misc@openbsd.org>
Subject: Fwd: wi0,d-link dwl-650 w/ pci bridge, airport, ping stops
From: <teddan@rupture.net>
Date: Wed, 6 Mar 2002 14:05:42 -0000
Misc,
I changed my port type to "0"(wicontrol -i wi0 -p 0) and no I can ping 
across. I cannot get WEP authenication to work yet. There isn't any 
documentation I could find on the significance of port type 0 or 2. Does any 
one know if port type '0' support WEP encryption and if so are there 
limitiations on it(40 bit key etc). If anyone is aware of a link with more 
info on the port types. Man wicontrol did not have any info on port type '0'

thanks in advance,
Ted

Forwarded From: "Daniel \"Ted\" Easley" <teddan@rupture.net>

> misc,
> I have an Open BSD box with a d-link dwl-500 (dlink dwl-650 + pcmcia
> bridge). I am trying to maintain a wireless connection between my Open box
> and my powerbook with a airport wireless card. I have airport set up right
> and I can actually ping across but the ping stops after 3 to 10 pings. I
> can ping across again if I reset the frequency "wicontrol -f 3". but then
> it stops again after 3-10 pings. I have tried changing frequency with no
> luck and distance is not an issue I got the same results from six inches
> away as in another room. I am using this in ad-hoc mode and with no
> encryption. I couldn't get it to work at all in bss mode. I have
> checked: http://www.live.com/wireless/unix-base-station.html. It did not
> help. Anyone have any ideas how to resolve this?
> 
> thanks,
> Ted
> 
> Porkula# dmesg
> OpenBSD 3.0-stable (PORKULA) #6: Wed Dec 12 21:52:28 CST 2001
>     ted@Porkula:/usr/src/sys/arch/i386/compile/PORKULA
> cpu0: F00F bug workaround installed
> cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 234 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> real mem  = 133804032 (130668K)
> avail mem = 118681600 (115900K)
> using 1658 buffers containing 6791168 bytes (6632K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(3a) BIOS, date 12/02/97, BIOS32 rev. 0 @ 0xfb400
> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb874
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfd460/144 (7 entries)
> pcibios0: PCI Exclusive IRQs: 0
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 
0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0x7e00 0xdc000/0x2000!
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82439TX System" rev 0x01
> pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <Maxtor 53073U6>
> wd0: 16-sector PIO, LBA, 29311MB, 16383 cyl, 16 head, 63 sec, 60030432  
sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "Intel 82371AB Power Mgmt" rev 0x01 at pci0 dev 7 function 3 not configured
> cbb0 at pci0 dev 10 function 0 "Ricoh 5C475 PCI-CardBus" rev 0x80: irq 12
> vga1 at pci0 dev 11 function 0 vendor "Synema", unknown product 0x2000 rev 
0x06
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb0 at pci0 dev 12 function 0 "DEC 21152 PCI-PCI" rev 0x03
> pci1 at ppb0 bus 2
> de0 at pci1 dev 4 function 0 "DEC 21142/3" rev 0x41: irq 9
> de0: 21143 [10-100Mb/s] pass 4.1 address 00:80:c8:f8:71:a8
> de1 at pci1 dev 5 function 0 "DEC 21142/3" rev 0x41: irq 7
> de1: 21143 [10-100Mb/s] pass 4.1 address 00:80:c8:f8:71:a9
> de2 at pci1 dev 6 function 0 "DEC 21142/3" rev 0x41: irq 12
> de2: 21143 [10-100Mb/s] pass 4.1 address 00:80:c8:f8:71:aa
> de3 at pci1 dev 7 function 0 "DEC 21142/3" rev 0x41: irq 7
> de3: 21143 [10-100Mb/s] pass 4.1 address 00:80:c8:f8:71:ab
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt1 at isa0 port 0x278/4: polled
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
> isapnp0 at isa0 port 0x279: read port 0x203
> pccom3 at isapnp0 "U.S. Robotics 56K FAX INT, USR3031, PNPC10F, " port
> 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20
> pcmcia0 at cardslot0
> biomask 5200 netmask 5280 ttymask 5282
> pctr: 586-class performance counters and user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
> wi0 at pcmcia0 function 0 "D, Link DWL-650 11Mbps WLAN Card, Version 01.02"
> de3: enabling 100baseTX port
> wi0: PRISM 2.5 ISL3873, Firmware 1.3 variant 4, address 00:05:5d:d6:d4:56
> de0: enabling 10baseT port
> de1: autosense failed: cable problem?
> de2: autosense failed: cable problem?
> 
> wicontrol
> NIC serial number:                      [ 99SA01000000 ]
> Station name:                           [ PORKULA ]
> SSID for IBSS creation:                 [ PORKULA ]
> Current netname (SSID):                 [ PORKULA ]
> Desired netname (SSID):                 [ PORKULA ]
> Current BSSID:                          [ 02:a3:84:83:61:89 ]
> Channel list:                           [ 2047 ]
> IBSS channel:                           [ 3 ]
> Current channel:                        [ 3 ]
> Comms quality/signal/noise:             [ 40 76 5 ]
> Promiscuous mode:                       [ Off ]
> Port type (1=BSS, 3=ad-hoc):            [ 3 ]
> MAC address:                            [ 00:05:5d:d6:d4:56 ]
> TX rate (selection):                    [ 3 ]
> TX rate (actual speed):                 [ 11 ]
> RTS/CTS handshake threshold:            [ 2347 ]
> Create IBSS:                            [ Off ]
> Access point density:                   [ 1 ]
> Power Mgmt (1=on, 0=off):               [ 0 ]
> Max sleep time:                         [ 100 ]
> WEP encryption:                         [ Off ]
> TX encryption key:                      [ 1 ]
> Encryption keys:                        [  ][  ][  ][  ]
> 
> Porkula# wicontrol -o
> Transmitted unicast frames:             14
> Transmitted multicast frames:           10
> Transmitted fragments:                  98309
> Transmitted unicast octets:             1680
> Transmitted multicast octets:           640
> Single transmit retries:                0
> Multiple transmit retries:              0
> Transmit retry limit exceeded:          0
> Transmit discards:                      0
> Transmit discards due to wrong SA:      0
> Received unicast frames:                7020
> Received multicast frames:              7288
> Received fragments:                     14308
> Received unicast octets:                436052
> Received multicast octets:              446379
> Receive FCS errors:                     85
> Receive discards due to no buffer:      0
> Can't decrypt WEP frame:                0
> Received message fragments:             0
> Received message bad fragments:         0
> 
> Porkula# ifconfig -a
> lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33224
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
>         inet6 ::1 prefixlen 128
>         inet 127.0.0.1 netmask 0xff000000
> wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         inet 10.0.1.1 netmask 0xffffff00 broadcast 10.0.1.255
>         inet6 fe80::205:5dff:fed6:d456%wi0 prefixlen 64 scopeid 0x18
> Porkula#
> 



--
Prev by Date: Re: changing mac address
Next by Date: Re: Error "cvs [update aborted]: could not chdir to games/snake/snake: Not a directory"
Prev by thread: wi0,d-link dwl-650 w/ pci bridge, airport, ping stops
Next by thread: working example of VPN (hosts to network)
Index(es):
- Date
- Thread