[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Promise IDE Controller error

To: misc@openbsd.org
Subject: Promise IDE Controller error
From: Doug Dalton <ddalton@shortbus.net>
Date: Thu, 07 Mar 2002 01:57:07 -0800
vendor "Promise", unknown product 0x4d69 (class mass storage, subclass
miscellaneous, rev 0x02) at pci2 dev 12 function 0 not configured
vendor "Promise", unknown product 0x4d69 (class mass storage, subclass
miscellaneous, rev 0x02) at pci2 dev 12 function 0 not configured
The os doesnt see the Seagate Baracuda 80 gig drive,  any ideas on if
this will work? or not?

The whole dmesg is below

0e90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x16e2
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1600/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xcc000/0x800 0xd0000/0x2800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x1a30
rev 0x04
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x1a31 rev
0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Fury" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
cmpci0 at pci2 dev 3 function 0 "C-Media Electronics CMI8738/C3DX Audio"
rev 0x1
0: irq 9
audio0 at cmpci0
ohci0 at pci2 dev 4 function 0 "NEC USB" rev 0x41: irq 9, OHCI version
1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci2 dev 4 function 1 "NEC USB" rev 0x41: irq 9, OHCI version
1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
vendor "NEC", unknown product 0xe0 (class serial bus, subclass USB, rev
0x02) at
 pci2 dev 4 function 2 not configured
xl0 at pci2 dev 11 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq
9xl0: comma
nd never completed!
xl0: command never completed!
 address 00:04:75:8d:14:29
exphy0 at xl0 phy 24: 3Com internal media interface
xl0: command never completed!
xl0: command never completed!
vendor "Promise", unknown product 0x4d69 (class mass storage, subclass
miscellan
eous, rev 0x02) at pci2 dev 12 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
channel 0 w
ired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L040AVER07-0>
wd0: 16-sector PIO, LBA, 39266MB, 16383 cyl, 16 head, 63 sec, 80418240
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU5221, 0.35> SCSI0 5/cdrom
removab
le
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 10
usb2 at uhci0: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB2" rev 0x05: irq 9
usb3 at uhci1: USB revision 1.0
uhub3 at usb3
uhub3: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c640 netmask c640 ttymask d6c2
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
arp info overwritten for 10.0.0.108 by 00:30:ab:08:b5:ec on xl0
syncing disks... OpenBSD 3.0 (PINKSLIP) #0: Thu Mar  7 08:56:48 PST 2002

    ddalton@pinkslip:/sys/arch/i386/compile/PINKSLIP
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 2.02 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM

X,FXSR,SIMD
real mem  = 1073242112 (1048088K)
avail mem = 989806592 (966608K)
using 5689 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(7d) BIOS, date 12/27/01, BIOS32 rev. 0 @
0xf0e90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x16e2
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1600/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB PCI-ISA" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xcc000/0x800 0xd0000/0x2800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x1a30
rev 0x04
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x1a31 rev
0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Fury" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x05
pci2 at ppb1 bus 2
cmpci0 at pci2 dev 3 function 0 "C-Media Electronics CMI8738/C3DX Audio"
rev 0x1
0: irq 9
audio0 at cmpci0
ohci0 at pci2 dev 4 function 0 "NEC USB" rev 0x41: irq 9, OHCI version
1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci2 dev 4 function 1 "NEC USB" rev 0x41: irq 9, OHCI version
1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
vendor "NEC", unknown product 0xe0 (class serial bus, subclass USB, rev
0x02) at
 pci2 dev 4 function 2 not configured
xl0 at pci2 dev 11 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq
9xl0: comma
nd never completed!
xl0: command never completed!
 address 00:04:75:8d:14:29
exphy0 at xl0 phy 24: 3Com internal media interface
xl0: command never completed!
xl0: command never completed!
vendor "Promise", unknown product 0x4d69 (class mass storage, subclass
miscellan
eous, rev 0x02) at pci2 dev 12 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
channel 0 w
ired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L040AVER07-0>
wd0: 16-sector PIO, LBA, 39266MB, 16383 cyl, 16 head, 63 sec, 80418240
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU5221, 0.35> SCSI0 5/cdrom
removab
le
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 10
usb2 at uhci0: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB2" rev 0x05: irq 9
usb3 at uhci1: USB revision 1.0
uhub3 at usb3
uhub3: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c640 netmask c640 ttymask d6c2
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Follow-Ups:
- Re: Promise IDE Controller error
  - From: Alexander Yurchenko <grange@rt.mipt.ru>
Prev by Date: Re: Error during make build of current
Next by Date: Re: PPP, default route, and long waiting, wierd problem
Prev by thread: Re: PGPnet 7.1 (30 days trail) and VPN (OBSD-3.0)
Next by thread: Re: Promise IDE Controller error
Index(es):
- Date
- Thread