[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: FTP / Web / Mail Server
Well, gentleman-know-it-all, here is how I installed and configured the
machine:
Booting by [floppy30.fs] floppy disk, after selecting Install, using the
entire sd0 disk as a root disk, labling 256m for /, 320m for <swap>, 64m for
/tmp, 128m for /var, 512m for /usr, and the rest for /home. It asked if I
want to configure the network, and I seleceted Y (since I am going to
install over FTP)
(..snip..)
Enter system hostname: mybox
Configure wich interface? fxp0
IP addtress: 192.168.0.100
Sympolic name: mybox
Netmask: 255.255.255.0
Media directives: [] <RET>
Enter DNS domain name: my_isp.com
Enter IP address for default route: 192.168.0.51
enter IP address for primary nameserver: 194.170.1.6
would you like to use the nameserver now? y
(..snip..)
and I installed ALL but game*, since I don't need it, nor I need to run X on
that system.
Rebooting after.. Nothing else whatsoever! Then I wanted to access the box
remotely using putty@windows2000 server, It hanged for about 2 minuts before
it allowed me to login... I was trying to login as root ofcource.. I didnt
add any account YET.
My network architecture is as followes:
[ADSL 1532Mbps line]==> CISCO 677 Router==> Nortel BayStack 450-24T Switch
||
Windows 2000 Server Box<==||
||==> OpenBSD Box
...etc
Now Mr Change user, do you think it is misconfigured ?! dmesg output
included.
>From: Chris Hedemark <chris@yonderway.com>
>To: misc@openbsd.org
>Subject: Re: FTP / Web / Mail Server
>Date: 07 Mar 2002 20:11:40 -0500
>
>On Thu, 2002-03-07 at 19:36, Richard Russell wrote:
> > I have tried to install OpenBSD 3.0 and set up as a FTP/web/mail server
>for
> > my local domain, but since the 3.0 has something wrong with ssh, as it
>hangs
> > when you try to login remotely using ssh, I thought may be the 3.0
>release
> > has some known issues.
>
>Wow, what a terrible issue.
>
>But OpenBSD, OpenSSH, and the combination of the two thereof as packaged
>in the version 3.0 distribution of OpenBSD all work fine.
>
>The problem is in your implementation (i.e. user error. replace user
>and press any key to continue)
>
> > I am asking you here folks: which release of OpenBSD is the most stable
>and
> > has less issues ? comparing 2.8, 2.9, and 3.0 ?
>
>I've got quite a number of 3.0 servers in production environments and
>they are fine. I ssh into them from all over the united states.
>
>The most serious issues I've seen with OpenBSD 3.0 are the personalities
>of some of the people on this list, not with the OS itself.
>
>Tell us more about your ssh problem. Maybe we can get you pointed in
>the right direction to fix it.
>
>--
>***********************************************************
>| Rev. Chris Hedemark, DD
>| Hillsborough, NC
>| http://yonderway.com
>| GPG Public Key - http://yonderway.com/chris/hedemark.gpg
>***********************************************************
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
openbsd# dmesg
OpenBSD 3.0 (GENERIC) #94: Thu Oct 18 14:48:27 MDT 2001
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 800 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
X,FXSR,SIMD
real mem = 133718016 (130584K)
avail mem = 118607872 (115828K)
using 1657 buffers containing 6787072 bytes (6628K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/05/00, BIOS32 rev. 0 @ 0xfd5a1
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xca000/0x5200
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 1
ahc1 at pci1 dev 3 function 0 "Adaptec AIC-7892 U160" rev 0x02: irq 9
ahc1: Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 40.0MHz, offset = 0x3f
sd0 at scsibus0 targ 0 lun 0: <IBM-PSG, DPSS-309170N M, S96E> SCSI3
0/direct fi
xed
sd0: 8678MB, 14627 cyl, 5 head, 243 sec, 512 bytes/sec, 17774160 sec total
vga1 at pci0 dev 1 function 0 "S3 Savage 4" rev 0x04
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08: irq 15, address
00:02:55:c
8:15:ab
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
"ESS ES1989" rev 0x12 at pci0 dev 10 function 0 not configured
openbsd# dmesg
OpenBSD 3.0 (GENERIC) #94: Thu Oct 18 14:48:27 MDT 2001
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 800 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem = 133718016 (130584K)
avail mem = 118607872 (115828K)
using 1657 buffers containing 6787072 bytes (6628K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/05/00, BIOS32 rev. 0 @ 0xfd5a1
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9 10 11 15
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xca000/0x5200
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 1
ahc1 at pci1 dev 3 function 0 "Adaptec AIC-7892 U160" rev 0x02: irq 9
ahc1: Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 40.0MHz, offset = 0x3f
sd0 at scsibus0 targ 0 lun 0: <IBM-PSG, DPSS-309170N M, S96E> SCSI3
0/direct fixed
sd0: 8678MB, 14627 cyl, 5 head, 243 sec, 512 bytes/sec, 17774160 sec total
vga1 at pci0 dev 1 function 0 "S3 Savage 4" rev 0x04
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08: irq 15, address
00:02:55:c8:15:ab
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
"ESS ES1989" rev 0x12 at pci0 dev 10 function 0 not configured
pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x50
pciide0 at pci0 dev 15 function 1 "ServerWorks IDE" rev 0x00: DMA
(unsupported), channel 0 configured to compatibility, channel 1 configured
to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITEON, CD-ROM LTN485S, JU03> SCSI0 5/cdrom
removable
pciide0: no compatibility interrupt for use by channel 1
ohci0 at pci0 dev 15 function 2 "ServerWorks USB" rev 0x04: irq 10, OHCI
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4640 netmask c640 ttymask d6c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
openbsd#