Re: Interface not coming up on reboot

[". ." <tiny_short@hotmail.com>]

>From: Liam <allenwc@shaw.ca>
>>I'm having a small problem with interfaces in my laptop not coming up.
>
>If you provide the dmesg we can see exactly what's up.

I guess a dmesg would have been handy :o)  I'm currently
mainly trying to get the wi0 to come up on boot as I'm
not too worried about xl1 (seeing as I have xl0 working and
rarely need to use 2 xl's)

thanks again
--ts

OpenBSD 3.0-stable (NOMAD) #12: Thu Mar 21 11:34:43 GMT 2002
    root@nomad:/src/sys/arch/i386/compile/GRIZWLD
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 748 MHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 167358464 (163436K)
avail mem = 151277568 (147732K)
using 2477 buffers containing 10145792 bytes (9908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/02/01, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 99%
apm0: AC on, battery charge high, charging, estimated 5:10 hours
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbd80/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 PCI-ISA and IDE" 
rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility M3" rev 0x02
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1420 PCI-CardBus" rev 
0x00: irq 11
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1420 PCI-CardBus" rev 
0x00: irq 11
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-220>
wd0: 16-sector PIO, LBA, 19077MB, 16383 cyl, 16 head, 63 sec, 39070080 
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
drive at pciide0 channel 1 drive 0 not configured
"Intel 82371AB USB" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not configured
"ESS Maestro 3" rev 0x10 at pci0 dev 8 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 4840 netmask 4840 ttymask 5842
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
xl0 at cardbus0 dev 0 function 0: 3Com 3c575-TX Ethernet: irq 11 address 
00:60:60:60:60:60
ukphy0 at xl0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c000, model 0x0000, rev. 0
wi0 at pcmcia1 function 0 "Lucent Technologies, WaveLAN/IEEE, Version 01.01"
wi0: Firmware 7.28 variant 1, address 00:02:2d:2d:2d:2d


_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com