[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
wi0: wi_cmd failed with 60

To: "misc@openbsd.org" <misc@openbsd.org>
Subject: wi0: wi_cmd failed with 60
From: Jordi YC <jordi_yc@lycos.es>
Date: Fri, 14 Jun 2002 20:20:29 -0400
Posted-Date: Sat, 15 Jun 2002 02:20:29 +0200 (DST)
Hi there,

After fixing hostname.wi0 to include the correct wicontrol commands -- thanks 
for the help, I am having some wi0 errors. It seems that this only happens if 
I try to connect using Windows XP using a Sony PCWA-C100 (Orinoco PC Card) 
OpenBSD 3.1 wi0 stops working and output wi0: wi_cmd failed with 60 (?)

OpenBSD 3.1 with Generic kernel

wicontrol shows:
wicontrol: SIOCGWAVELAN: Invalid argument

ifconfig wi0 down works fine

ifconfig wi0 up, it seems that the systems is freeze, but ~5 secs after the 
shell is there.

TIA

Is there any other test or info that it can be helpful?

Follows a copy of dmesg

Jun 14 15:19:50 jun3 /bsd: OpenBSD 3.1 (GENERIC) #59: Sat Apr 13 15:28:52 MDT 
2002
Jun 14 15:19:50 jun3 /bsd:     
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
Jun 14 15:19:50 jun3 /bsd: cpu0: AMD K6-2 ("AuthenticAMD" 586-class) 395 MHz
Jun 14 15:19:50 jun3 /bsd: cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
Jun 14 15:19:50 jun3 /bsd: real mem  = 66695168 (65132K)
Jun 14 15:19:50 jun3 /bsd: avail mem = 56287232 (54968K)
Jun 14 15:19:50 jun3 /bsd: using 839 buffers containing 3436544 bytes (3356K) 
of memory
Jun 14 15:19:50 jun3 /bsd: mainbus0 (root)
Jun 14 15:19:50 jun3 /bsd: bios0 at mainbus0: AT/286+(b2) BIOS, date 10/18/99, 
BIOS32 rev. 0 @ 0xfa0c0
Jun 14 15:19:50 jun3 /bsd: pcibios0 at bios0: rev. 2.1 @ 0xfa040/0x1000
Jun 14 15:19:51 jun3 /bsd: pcibios0: PCI IRQ Routing Table rev. 1.0 @ 
0xfa040/128 (6 entries)
Jun 14 15:19:51 jun3 /bsd: pcibios0: PCI Interrupt Router at 000:20:0 ("VIA 
VT82C586 PCI-ISA" rev 0x00)
Jun 14 15:19:51 jun3 /bsd: pcibios0: PCI bus #1 is the last bus
Jun 14 15:19:51 jun3 /bsd: bios0: ROM list: 0xc0000/0x10000
Jun 14 15:19:51 jun3 /bsd: pci0 at mainbus0 bus 0: configuration mode 1 (no 
bios)
Jun 14 15:19:51 jun3 /bsd: pchb0 at pci0 dev 0 function 0 "VIA VT82C598 
Host-PCI" rev 0x04
Jun 14 15:19:51 jun3 /bsd: ppb0 at pci0 dev 1 function 0 "VIA VT82C598 
PCI-AGP" rev 0x00
Jun 14 15:19:51 jun3 /bsd: pci1 at ppb0 bus 1
Jun 14 15:19:51 jun3 /bsd: vga1 at pci1 dev 0 function 0 "ATI Mach64 LB" rev 
0xdc
Jun 14 15:19:51 jun3 /bsd: wsdisplay0 at vga1: console (80x25, vt100 
emulation)
Jun 14 15:19:51 jun3 /bsd: wsdisplay0: screen 1-5 added (80x25, vt100 
emulation)
Jun 14 15:19:51 jun3 /bsd: wi0 at pci0 dev 3 function 0 "US Robotics 
USR11000P" rev 0x02: irq 11
Jun 14 15:19:51 jun3 /bsd: wi0: "U.S. Robotics, IEEE 802.11b PC-CARD, Version 
01.02"
Jun 14 15:19:51 jun3 /bsd: wi0: PRISM II HWB3163 rev.A, Firmware 0.3.0 
(primary), 0.7.6 (station), address 00:90:d1:07:fd:13
Jun 14 15:19:51 jun3 /bsd: ne3 at pci0 dev 4 function 0 "Realtek 8029" rev 
0x00: irq 11
Jun 14 15:19:51 jun3 /bsd: ne3: address 00:20:18:2c:3a:b0
Jun 14 15:19:51 jun3 /bsd: pcib0 at pci0 dev 20 function 0 "VIA VT82C586 
PCI-ISA" rev 0x45
Jun 14 15:19:51 jun3 /bsd: pciide0 at pci0 dev 20 function 1 "VIA VT82C571 
IDE" rev 0x06: ATA33, channel 0 configured to compatibility, channel 1 
configured to compatibility
Jun 14 15:19:51 jun3 /bsd: wd0 at pciide0 channel 0 drive 0: <QUANTUM BIGFOOT 
TS8.4A>
Jun 14 15:19:51 jun3 /bsd: wd0: 16-sector PIO, LBA, 8064MB, 16383 cyl, 16 
head, 63 sec, 16515072 sectors
Jun 14 15:19:51 jun3 /bsd: wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 
2
Jun 14 15:19:51 jun3 /bsd: atapiscsi0 at pciide0 channel 1 drive 0
Jun 14 15:19:51 jun3 /bsd: scsibus0 at atapiscsi0: 2 targets
Jun 14 15:19:51 jun3 /bsd: cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM 
LTN301, MM11> SCSI0 5/cdrom removable
Jun 14 15:19:51 jun3 /bsd: wd1 at pciide0 channel 1 drive 1: <ST36531A>
Jun 14 15:19:51 jun3 /bsd: wd1: 32-sector PIO, LBA, 6204MB, 13446 cyl, 15 
head, 63 sec, 12706470 sectors
Jun 14 15:19:51 jun3 /bsd: cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 
2
Jun 14 15:19:51 jun3 /bsd: wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 
2
Jun 14 15:19:51 jun3 /bsd: uhci0 at pci0 dev 20 function 2 "VIA VT83C572 USB" 
rev 0x02: irq 10
Jun 14 15:19:51 jun3 /bsd: usb0 at uhci0: USB revision 1.0
Jun 14 15:19:51 jun3 /bsd: uhub0 at usb0
Jun 14 15:19:51 jun3 /bsd: uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 
1.00/1.00, addr 1
Jun 14 15:19:51 jun3 /bsd: uhub0: 2 ports with 2 removable, self powered
Jun 14 15:19:51 jun3 /bsd: "VIA VT82C586 Power Mgmt" rev 0x10 at pci0 dev 20 
function 3 not configured
Jun 14 15:19:51 jun3 /bsd: isa0 at pcib0
Jun 14 15:19:52 jun3 /bsd: isadma0 at isa0
Jun 14 15:19:52 jun3 /bsd: pckbc0 at isa0 port 0x60/5
Jun 14 15:19:52 jun3 /bsd: pckbd0 at pckbc0 (kbd slot)
Jun 14 15:19:52 jun3 /bsd: pckbc0: using irq 1 for kbd slot
Jun 14 15:19:52 jun3 /bsd: wskbd0 at pckbd0: console keyboard, using 
wsdisplay0
Jun 14 15:19:52 jun3 /bsd: sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
Jun 14 15:19:52 jun3 /bsd: midi0 at sb0: <SB MIDI UART>
Jun 14 15:19:52 jun3 /bsd: audio0 at sb0
Jun 14 15:19:52 jun3 /bsd: opl0 at sb0: model OPL3
Jun 14 15:19:52 jun3 /bsd: midi1 at opl0: <SB Yamaha OPL3>
Jun 14 15:19:52 jun3 /bsd: pcppi0 at isa0 port 0x61
Jun 14 15:19:52 jun3 /bsd: midi2 at pcppi0: <PC speaker>
Jun 14 15:19:52 jun3 /bsd: sysbeep0 at pcppi0
Jun 14 15:19:52 jun3 /bsd: lpt0 at isa0 port 0x378/4 irq 7
Jun 14 15:19:52 jun3 /bsd: npx0 at isa0 port 0xf0/16: using exception 16
Jun 14 15:19:52 jun3 /bsd: pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 
byte fifo
Jun 14 15:19:52 jun3 /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
Jun 14 15:19:52 jun3 /bsd: isapnp0 at isa0 port 0x279: read port 0x203
Jun 14 15:19:52 jun3 /bsd: ne4 at isapnp0 "Ethernet PnP ISA Card /S   , 
AXE2201, PNP80D6, " port 0x240/32 irq 3
Jun 14 15:19:52 jun3 /bsd: ne4: NE2000 Ethernet
Jun 14 15:19:52 jun3 /bsd: ne4: address 00:40:05:54:46:87
Jun 14 15:19:52 jun3 /bsd: biomask c440 netmask cc48 ttymask ccca
Jun 14 15:19:52 jun3 /bsd: pctr: user-level cycle counter enabled
Jun 14 15:19:52 jun3 /bsd: mtrr: K6-family MTRR support (2 registers)
Jun 14 15:19:52 jun3 /bsd: dkcsum: wd0 matched BIOS disk 80
Jun 14 15:19:52 jun3 /bsd: dkcsum: wd1 matched BIOS disk 81
Jun 14 15:19:52 jun3 /bsd: root on wd0a
Jun 14 15:19:52 jun3 /bsd: rootdev=0x0 rrootdev=0x300 rawdev=0x302
Jun 14 15:19:50 jun3 pflogd[10959]: Listening on pflog0, logging to 
/var/log/pflog, snaplen 96 
Jun 14 15:19:52 jun3 savecore: no core dump
Jun 14 15:59:45 jun3 /bsd: wi0: wi_cmd failed with 60
Jun 14 16:00:45 jun3 /bsd: wi0: wi_cmd failed with 60
Jun 14 16:02:45 jun3 last message repeated 2 times
Jun 14 16:12:45 jun3 last message repeated 10 times
Jun 14 16:22:45 jun3 last message repeated 10 times
Jun 14 16:27:45 jun3 last message repeated 5 times
Jun 14 16:28:36 jun3 /bsd: wi0: init failed
Jun 14 16:28:36 jun3 /bsd: wi0: failed to allocate 1594 bytes on NIC
Jun 14 16:28:36 jun3 /bsd: wi0: tx buffer allocation failed
Jun 14 16:28:36 jun3 /bsd: wi0: failed to allocate 1594 bytes on NIC
Jun 14 16:28:36 jun3 /bsd: wi0: mgmt. buffer allocation failed
Jun 14 16:29:36 jun3 /bsd: wi0: wi_cmd failed with 60
Jun 14 16:30:36 jun3 /bsd: wi0: wi_cmd failed with 60
Follow-Ups:
- Re: wi0: wi_cmd failed with 60
  - From: Pedro la Peu <pedro@ironchicken.am-gen.org>
Prev by Date: Re: Firewall Hardware
Next by Date: Re: X Windows and Intel i810 driver
Prev by thread: Cadastre sua empresa gratuitamente no site EmpresasOnline.com.br
Next by thread: Re: wi0: wi_cmd failed with 60
Index(es):
- Date
- Thread