[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Wireless network packet loss...
have you tried a different frequency?
also, you have "-c1" instead of "-c 1".
SHA1 ("- jolan luff -") = 6a84731de1d7d5b69c72ebf1a0b721393b358dcf
On Sun, 23 Jun 2002, Tim Jones wrote:
> client > cat /etc/hostname.wi0
> !wicontrol \$if -p 4 -n hyperbl0ck -s eraser -f 1
> inet 10.10.10.1 255.255.255.0 10.10.10.255
> !sh /etc/rc.ipsec
>
> server > cat /etc/hostname.wi0
> !wicontrol \$if -p 4 -c1 -n hyperbl0ck -s server -f 1
> inet 10.10.10.2 255.255.255.0 10.10.10.255 mtu 1444
> !sh /etc/rc.ipsec
>
>
> client > dmesg
> 215: Tue Jun 11 21:07:53 MDT 2002
>
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD K6-2 ("AuthenticAMD" 586-class) 300 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> real mem = 49917952 (48748K)
> avail mem = 40685568 (39732K)
> using 634 buffers containing 2596864 bytes (2536K) of
> memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(8f) BIOS, date 05/21/98,
> BIOS32 rev. 0 @ 0xfd7f0
> pcibios0 at bios0: rev. 2.1 @ 0xfd7f0/0x810
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf90/80
> (3 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel
> 82371SB PCI-ISA" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82437VX" rev
> 0x02
> pcib0 at pci0 dev 7 function 0 "Intel 82371SB PCI-ISA"
> rev 0x01
> pciide0 at pci0 dev 7 function 1 "Intel 82371SB IDE"
> rev 0x00: DMA, channel 0 wired to compatibility,
> channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <QUANTUM Bigfoot
> TX4.0AT>
> wd0: 16-sector PIO, LBA, 3832MB, 8306 cyl, 15 head, 63
> sec, 7849170 sectors
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> uhci0 at pci0 dev 7 function 2 "Intel 82371SB USB" rev
> 0x01: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev
> 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> wi0 at pci0 dev 19 function 0 "Intersil PRISM2.5
> Mini-PCI WLAN" rev 0x01: irq 11
> wi0: PRISM 2.5 ISL3874A(PCI), Firmware 1.0.5
> (primary), 1.3.4 (station), address 00:06:25:a7:d9:95
> vga1 at pci0 dev 20 function 0 "S3 ViRGE DX/GX" rev
> 0x01
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
> midi0 at sb0: <SB MIDI UART>
> audio0 at sb0
> opl0 at sb0: model OPL3
> midi1 at opl0: <SB Yamaha OPL3>
> pcppi0 at isa0 port 0x61
> midi2 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> isapnp0 at isa0 port 0x279: read port 0x203
> ne3 at isapnp0 "Genius LAN KE2000 PnP LAN Adapt,
> KYE9008, PNP80D6, " port 0x280/32 mem 0xc8000/16384
> irq 10
> ne3: NE2000 Ethernet
> ne3: address 00:c0:df:81:8f:7d
> biomask 4840 netmask 4c40 ttymask 4cc2
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> syncing disks... OpenBSD 3.1-current (GENERIC) #215:
> Tue Jun 11 21:07:53 MDT 2002
>
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD K6-2 ("AuthenticAMD" 586-class) 300 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> real mem = 49917952 (48748K)
> avail mem = 40685568 (39732K)
> using 634 buffers containing 2596864 bytes (2536K) of
> memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(8f) BIOS, date 05/21/98,
> BIOS32 rev. 0 @ 0xfd7f0
> pcibios0 at bios0: rev. 2.1 @ 0xfd7f0/0x810
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf90/80
> (3 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel
> 82371SB PCI-ISA" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82437VX" rev
> 0x02
> pcib0 at pci0 dev 7 function 0 "Intel 82371SB PCI-ISA"
> rev 0x01
> pciide0 at pci0 dev 7 function 1 "Intel 82371SB IDE"
> rev 0x00: DMA, channel 0 wired to compatibility,
> channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <QUANTUM Bigfoot
> TX4.0AT>
> wd0: 16-sector PIO, LBA, 3832MB, 8306 cyl, 15 head, 63
> sec, 7849170 sectors
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> uhci0 at pci0 dev 7 function 2 "Intel 82371SB USB" rev
> 0x01: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev
> 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> wi0 at pci0 dev 19 function 0 "Intersil PRISM2.5
> Mini-PCI WLAN" rev 0x01: irq 11
> wi0: PRISM 2.5 ISL3874A(PCI), Firmware 1.0.5
> (primary), 1.3.4 (station), address 00:06:25:a7:d9:95
> vga1 at pci0 dev 20 function 0 "S3 ViRGE DX/GX" rev
> 0x01
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
> midi0 at sb0: <SB MIDI UART>
> audio0 at sb0
> opl0 at sb0: model OPL3
> midi1 at opl0: <SB Yamaha OPL3>
> pcppi0 at isa0 port 0x61
> midi2 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> isapnp0 at isa0 port 0x279: read port 0x203
> ne3 at isapnp0 "Genius LAN KE2000 PnP LAN Adapt,
> KYE9008, PNP80D6, " port 0x280/32 mem 0xc8000/16384
> irq 10
> ne3: NE2000 Ethernet
> ne3: address 00:c0:df:81:8f:7d
> biomask 4840 netmask 4c40 ttymask 4cc2
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> syncing disks... OpenBSD 3.1-current (GENERIC) #215:
> Tue Jun 11 21:07:53 MDT 2002
>
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD K6-2 ("AuthenticAMD" 586-class) 300 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
> real mem = 49917952 (48748K)
> avail mem = 40685568 (39732K)
> using 634 buffers containing 2596864 bytes (2536K) of
> memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(8f) BIOS, date 05/21/98,
> BIOS32 rev. 0 @ 0xfd7f0
> pcibios0 at bios0: rev. 2.1 @ 0xfd7f0/0x810
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf90/80
> (3 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel
> 82371SB PCI-ISA" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82437VX" rev
> 0x02
> pcib0 at pci0 dev 7 function 0 "Intel 82371SB PCI-ISA"
> rev 0x01
> pciide0 at pci0 dev 7 function 1 "Intel 82371SB IDE"
> rev 0x00: DMA, channel 0 wired to compatibility,
> channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <QUANTUM Bigfoot
> TX4.0AT>
> wd0: 16-sector PIO, LBA, 3832MB, 8306 cyl, 15 head, 63
> sec, 7849170 sectors
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> uhci0 at pci0 dev 7 function 2 "Intel 82371SB USB" rev
> 0x01: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev
> 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> wi0 at pci0 dev 19 function 0 "Intersil PRISM2.5
> Mini-PCI WLAN" rev 0x01: irq 11
> wi0: PRISM 2.5 ISL3874A(PCI), Firmware 1.0.5
> (primary), 1.3.4 (station), address 00:06:25:a7:d9:95
> vga1 at pci0 dev 20 function 0 "S3 ViRGE DX/GX" rev
> 0x01
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
> midi0 at sb0: <SB MIDI UART>
> audio0 at sb0
> opl0 at sb0: model OPL3
> midi1 at opl0: <SB Yamaha OPL3>
> pcppi0 at isa0 port 0x61
> midi2 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> isapnp0 at isa0 port 0x279: read port 0x203
> ne3 at isapnp0 "Genius LAN KE2000 PnP LAN Adapt,
> KYE9008, PNP80D6, " port 0x280/32 mem 0xc8000/16384
> irq 10
> ne3: NE2000 Ethernet
> ne3: address 00:c0:df:81:8f:7d
> biomask 4840 netmask 4c40 ttymask 4cc2
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
>
> (Not sure why it repeats 3 times like this.)
>
>
> server > dmesg
> OpenBSD 3.1-current (GENERIC) #218: Mon Jun 17
> 01:45:15 MDT 2002
>
> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium III (Coppermine) ("GenuineIntel"
> 686-class, 128KB L2 cache) 601 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
> real mem = 132689920 (129580K)
> avail mem = 117354496 (114604K)
> using 1645 buffers containing 6737920 bytes (6580K) of
> memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(cb) BIOS, date 09/28/00,
> BIOS32 rev. 0 @ 0xfb370
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb7f0
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfd830/80
> (3 entries)
> pcibios0: PCI Exclusive IRQs: 5 11 12
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel
> 82371SB PCI-ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0xa000 0xcc000/0x1000
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev
> 0x02: rng active, 9Kb/sec
> vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics"
> rev 0x02
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb0 at pci0 dev 30 function 0 "Intel 82801AA
> Hub-to-PCI" rev 0x02
> pci1 at ppb0 bus 1
> wi0 at pci1 dev 0 function 0 "Intersil PRISM2.5
> Mini-PCI WLAN" rev 0x01: irq 12
> wi0: PRISM 2.5 ISL3874A(PCI), Firmware 1.0.5
> (primary), 1.3.4 (station), address 00:06:25:a7:d9:79
> fxp0 at pci1 dev 1 function 0 "Intel 82557" rev 0x08:
> irq 11, address 00:d0:b7:85:88:8a
> inphy0 at fxp0 phy 1: i82555 10/100 media interface,
> rev. 4
> pcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC"
> rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE"
> rev 0x02: DMA, channel 0 wired to compatibility,
> channel 1 wired to compatibility
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> wdc_atapi_intr: warning: reading only 14 of 18 bytes
> wdc_atapi_intr: warning: reading only 0 of 18 bytes
> wdc_atapi_intr: warning: reading only 14 of 18 bytes
> wdc_atapi_intr: warning: reading only 0 of 18 bytes
> wdc_atapi_intr: warning: reading only 22 of 36 bytes
> wdc_atapi_intr: warning: reading only 0 of 36 bytes
> wdc_atapi_intr: warning: reading only 14 of 18 bytes
> wdc_atapi_intr: warning: reading only 0 of 18 bytes
> cd0 at scsibus0 targ 0 lun 0: <NEC, CD-ROM DRIVE:272,
> 4.15> SCSI0 5/cdrom removable
> cd0(pciide0:0:1): using PIO mode 3
> wd0 at pciide0 channel 1 drive 0: <Maxtor 91366U4>
> wd0: 16-sector PIO, LBA, 13029MB, 16383 cyl, 16 head,
> 63 sec, 26684784 sectors
> wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
> uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB"
> rev 0x02: irq 5
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev
> 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97
> Audio" rev 0x02: irq 11 ICH AC97
> ac97: codec id 0x83847644 (SigmaTel STAC9744/45)
> ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel
> 3D
> audio0 at auich0
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
> fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte
> fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask c060 netmask d860 ttymask d8e2
> pctr: 686-class user-level performance counters
> enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
>
> Thanks a bunch for the help.
> Yahoo! - Official partner of 2002 FIFA World Cup
> http://fifaworldcup.yahoo.com