3.1 and aha panic

["Denis A. Doroshenko" <d.doroshenko@omnitel.net>]

hello gents, this is what i get for box, which seemed to run 3.0 with no
probs:

booting hd0a:/bsd: 3887104+335872+823752+[141972+178084]=0x61e408 start=0xe0100020
entry point at 0x100020
 pciinfo 0xe068d1a0
[ using 320060 bytes of bsd a.out symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2002 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.1 (GENERIC) #59: Sat Apr 13 15:28:52 MDT 2002
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: F00F bug workaround installed
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 199 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
real mem  = 83472384 (81516K)
avail mem = 71708672 (70028K)
using 1044 buffers containing 4276224 bytes (4176K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ec) BIOS, date 07/09/97, BIOS32 rev. 0 @ 0xf75e7
pcibios0 at bios0: rev. 2.1 @ 0xf7530/0x970
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 9
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB PCI-ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xdc000/0x4000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439HX" rev 0x03
vendor "Siemens AG / Siemens Nixdorf AG", unknown product 0x5 (class undefined, unknown subclass 0x00, rev 0x01) at pci0 dev 3 function 0 not configured
vendor "Siemens AG / Siemens Nixdorf AG", unknown product 0x5 (class undefined, unknown subclass 0x00, rev 0x01) at pci0 dev 3 function 1 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371SB PCI-ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC AC22500L>
wd0: 16-sector PIO, LBA, 2441MB, 4960 cyl, 16 head, 63 sec, 4999680 sectors
wd1 at pciide0 channel 0 drive 1: <ST36531A>
wd1: 32-sector PIO, LBA, 6204MB, 13446 cyl, 15 head, 63 sec, 12706470 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6002B, 1047> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 3
vga1 at pci0 dev 8 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
de0 at pci0 dev 18 function 0 "DEC 21041" rev 0x11: irq 9
de0: 21041 [10Mb/s] pass 1.1 address 00:80:48:e8:c3:ea
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
de0: enabling 10baseT port
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
(bha probe): bha_cmd, cmd/data port empty 13
aha0 at isa0 port 0x330/4 irq 11 drq 5: model AHA-1542CF, firmware A.0
aha0: unlocking mailbox interface
aha0: async, no parity
kernel: page fault trap, code=0
Stopped at      _aha_init+0x1bd:        pushl   0x34(%ebx)
ddb>

with:

ddb> trace
_aha_init(e07db400,30,e06216e8,e04000c8,e07db400,5,0,e01c1481) at _aha_init+0x1
bd
_ahaattach(e07db800,e07db400,e0621a1c,0,e0621a1c,e07db400,e04bcaf4,0,0,e04ff9a0
,e0621ce8,e03fd234,e07db800,e07db400,e0621a1c,e03fcc94,e04b5bd0,e04b6e9c,e04bca
f4,e01bf768,75b,e07cd000,e07cd000,e04b6e9c,e07c85cc,4000,e0621788,e01c12e6,65,2
710,3,e0621784,fffffff6,9,e02ff747,e030e92a,e07c85cc,1a200,e0621808,e01c233f,65
,5,0,e06217bc,0,1,e0520e14,0,0,80,e06217bc,ffffffff,a,5,1,0,7c85cc,0,e06217f8,e
042eb31,0) at _ahaattach+0xb1
_config_attach(e07db800,e07db400,e0621a1c,e03fcc94,e04b5bd0) at _config_attach+
0x13e
_isascan(e07db800,e07db400,f,10) at _isascan+0x398
_config_scan(e03fce9c,e07db800,e0621de4,e01c1481,e04b7f10) at _config_scan+0x9f

_isaattach(e07c3f00,e07db800,e0621de4,e04b7f10,e03fc9f8,e0621de4,e07c3f00,e0621
de4,0,e04ff7f4,e0621db8,e01bb75b,e07c3f00,e04b6d10,e0621de4,e03fc9f8,e07c3f00,0
,e0621df8,e0313004,e07c3f00,0,e0621df8,e03fc9e6,e07c3f00,e0621de4,e03fc9f8,0,e0
7bdf70,e07c3f40,20,2000011,1,e03fc996,0,1,e05008e4,0,e0621e28,e01bc17e,e07c3f00
,1,e04ff764,e04c74dc,e04b7f10,e07c3f40,e04c7508,0,80009000,141011,e0621e68,e01b
b99b,e07c3f40,e0620901,e0621e68,e01bb992,e07c3fc0,e07c3f40,e0621ec8,e04b7f10,e0
312eb8) at _isaattach+0x117
_config_attach(e07c3f00,e04b6d10,e0621de4,e03fc9f8,e07c3f00) at _config_attach+
0x13e
_config_found_sm(e07c3f00,e0621de4,e03fc9f8,0,e07bdf70) at _config_found_sm+0x2
f
_pcib_callback(e07c3f00,1,e04ff764,e04c74dc,e04b7f10,e07c3f40,e04c7508,0,800090
00,141011,e0621e68,e01bb99b,e07c3f40,e0620901,e0621e68,e01bb992,e07c3fc0,e07c3f
40,e0621ec8,e04b7f10,e0312eb8,e0621ec8,e07c3fc0,e0621ec8,0,e04c74f0,e0621e98,e0
1bb75b,e07c3fc0,e04b60b0,e0621ec8,e0312eb8,e0621ec8,e07c3fc0,e04c74dc,e0312dde,
e07c3fc0,e0621ec8,e0621ee8,e0312e1b,e07c3fc0,e0621ec8,e0312eb8,0,e04b7f10,e07c3
fc0,0,0,e0621ef8,0,e0312d8d,0,1,e04ff764,e04c74dc,0,0,e02e0030,e0621f18,e01bb99
2,0,e07c3fc0) at _pcib_callback+0x4a
_config_process_deferred_children(e07c3f40,e0620901,e0621e68,e01bb992,e07c3fc0)
 at _config_process_deferred_children+0x4a
_config_attach(e07c3fc0,e04b60b0,e0621ec8,e0312eb8,e0621ec8) at _config_attach+
0x147
_config_found_sm(e07c3fc0,e0621ec8,e0312eb8,0) at _config_found_sm+0x2f
_mainbus_attach(0,e07c3fc0,0,16,0,e02e2d2d,626000,0,0,e04c74c4,e0621f48,e01bb7e
b,0,e04b608c,0,0,e061f010,e05b4768,50,e0421f70,e061f010,e,e0621f68,e02e2dc3,e02
e2d2d,0,e0621f68,e02e2db4,e72d0000,e76d0000,e0621fa8,e01a91ac,e061f010,61f000,6
26000,0,0,0,0,10,10,e068d070,2,702007ff,e05b,0,0,e0100343,0,0,0,0,0,0,0,0,0,0,0
,0,0) at _mainbus_attach+0x7b
_config_attach(0,e04b608c,0,0,e061f010) at _config_attach+0x13e
_config_rootfound(e02e2d2d,0,e0621f68,e02e2db4) at _config_rootfound+0x3f
_cpu_configure(e061f010,61f000,626000,0,0) at _cpu_configure+0x1f
_main(0,0,0,0,0) at _main+0x68
ddb>

what do i do, besides "disable aha"? BTW, that "(bha probe): bha_cmd,
cmd/data port empty 13" does not seem to affect anything, since this all
is simply reproduced even with "disable bha".

yep, and custom kernel bombs at an other position, though it bobms
any way:

Stopped at      _aha_init+0x1c5:        movl    0x34(%ebx),%eax

-- 
Denis A. Doroshenko, GPRS engineer
Omnitel Ltd., T. Sevcenkos st. 25, Vilnius, Lithuania
d.doroshenko@omnitel.net, +370 2 262188