Re: sis 645/961

[Gavin Watson <gwatson@umbc.edu>]

Henning Brauer wrote:

> On Thu, Jun 27, 2002 at 04:33:42PM -0400, Gavin Watson wrote:
> > Unfortunately it didn't locate the phy.  The phy is ics 1893.  Anybody have
> > any ideas?
>
> dmesg please.

dmesg (GENERIC with patch for if_sis.c & if_sisreg.h from
http://marc.theaimsgroup.com/?l=openbsd-bugs&m=102184198432437&w=2 )

syncing disks... OpenBSD 3.1-stable (TEST) #41: Fri Jun 28 13:51:23 EST 2002
    root@p41:/usr/src/sys/arch/i386/compile/TEST
cpu0: Intel Pentium 4 ("GenuineIntel" 686-class) 1.82 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
X,FXSR,SIMD
real mem  = 234450944 (228956K)
avail mem = 211562496 (206604K)
using 2887 buffers containing 11825152 bytes (11548K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(1a) BIOS, date 03/05/02, BIOS32 rev. 0 @ 0xf1200
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x19f2
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1970/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xec000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "SIS", unknown product 0x650 rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "SIS", unknown product 0x6325 rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 ISA" rev 0x00
ohci0 at pci0 dev 2 function 2 "SIS 5597/5598 USB" rev 0x07: irq 3, OHCI version
 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 2 function 3 "SIS 5597/5598 USB" rev 0x07: irq 9, OHCI version
 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: DMA, channel 0 wired
to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <MAXTOR 6L020L1>
wd0: 16-sector PIO, LBA, 19595MB, 16383 cyl, 16 head, 63 sec, 40132503 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
vendor "SIS", unknown product 0x7012 (class multimedia, subclass audio, rev 0xa0
) at pci0 dev 2 function 7 not configured
sis0 at pci0 dev 3 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 9 address 00:
e0:18:73:c6:2e
ep0 at pci0 dev 14 function 0 "3Com 3c595 100Base-TX" rev 0x00: address 00:a0:24
:56:a3:fe, utp/100-TX default utp irq 10
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 8248 netmask 8648 ttymask 96ca
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302