Re: patched, compiled and no network

["tim smith" <tims@cqpl.com.au>]

----- Original Message -----
From: "Sancho2k.net Lists" <lists@sancho2k.net>
To: "Tim Smith" <tims@cqpl.com.au>
Sent: Sunday, February 02, 2003 7:58 PM
Subject: Re: patched, compiled and no network


> Tim Smith wrote:
> > i just applied the 001_kadmin.patch, 002_pfbridge.patch and the
004_pool.patch
> > to 3.2, the patch applied just fine no errors,i compiled the patched
kernel,
> > restarted and cannot ping outside of the box ( can ping it's own nic ).
so i
> > thought " fine reboot with bsd.old " did that still cannot ping past the
boxes
> > own nic. i'm running on a 2 machine network with a cross over cable
connecting
> > them. i don't see any errors of any kind in the message log, or boot up,
on
> > either machine. anyone else experienced this?
> >
>
> Could you have somehow (for any reason) lost routes for the directly
> connected network? What does 'route -n show' give?
>
> DS
>
the default route is still the same ( as per /etc/mygate), i did run "route
show" but gave up on it since it couldn't contact the default route and sat
there forever. however the routing table shouldn't even come into it becuase
both machines are on the same subnet ( 192.168.0.0 ) and they should find
each other via arp anyway right ?