Re: NIC card recognized but not activated during install

[Lane Myer <myer@FreeBSD-uk.eu.org>]

On Sat, Apr 26, 2003 at 12:03:05PM -0400, francisco wrote:
> Post the dmesg to the list.
> 
> Look at
> http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pcmcia/if_ne_pcmcia.c
> search for the string kne-pcm and read the comment above it.  Looks like
> there's no support for that model, but with your dmesg maybe it can get
> included.

dmesg is attached.  I got the system working with a different card, but how
could I go about helping add the other one to the supported list?

lane
OpenBSD 3.2 (RAMDISKC) #429: Thu Oct  3 20:15:54 MDT 2002
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISKC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 267 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 167292928 (163372K)
avail mem = 151261184 (147716K)
using 2067 buffers containing 8466432 bytes (8268K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 02/17/99, BIOS32 rev. 0 @ 0xfc240
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf0f80/96 (4 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
WARNING: can't reserve area for I/O APIC.
WARNING: can't reserve area for Local APIC.
bios0: ROM list: 0xc0000/0xc000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
cbb0 at pci0 dev 2 function 0 "Toshiba ToPIC97 PCI-CardBus" rev 0x05: irq 11
cbb1 at pci0 dev 2 function 1 "Toshiba ToPIC97 PCI-CardBus" rev 0x05: irq 11
vga1 at pci0 dev 4 function 0 "Chips and Technologies 65555" rev 0xc6
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DKLA-24320>
wd0: 16-sector PIO, LBA, 4126MB, 8944 cyl, 15 head, 63 sec, 8452080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-220EA, 7.1B> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Intel 82371AB USB" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
"Toshiba Fast Infrared Type O" rev 0x23 at pci0 dev 10 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c840 netmask c840 ttymask c842
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
pccom3 at pcmcia0 function 0 "Toshiba America, 3CXM056-BNW, 3COM/NoteWorthy 56K Modem" port 0xa3f8/8: ns16550a, 16 byte fifo
"Kingston Technology Corp., EtheRx PC Card Ethernet Adapter, KNE-PCM/x, PC-NIC ENCC 990010759-001A" (manufacturer 0x186, product 0x1) at pcmcia1 function 0 not configured