[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

cdrom33.fs for AIC7XXX

To: misc@openbsd.org
Subject: cdrom33.fs for AIC7XXX
From: Alexander.Farber@t-online.de (Alexander Farber)
Date: Mon, 5 May 2003 10:47:26 +0000
Content-Disposition: inline
References: <20030501174703.GA24583@simplex.my.domain> <20030501183454.GA14485@pinky.westerback.to> <20030501230055.GA10481@simplex.my.domain>
User-Agent: Mutt/1.5.4i

Naddy's script has worked for me for the 3.3 and I've 
been able to install it on my PC with Adaptec AIC7890 
SCSI-controller. You can find the cdrom33.fs and bsd 
http://home.t-online.de/home/Alexander.Farber/aic7xxx/

I still have warnings from the ahc driver though
(notably not with my both ultra-wide SCSI hard disks,
but only with ultra-SCSI Plextor CD-burner):

.....
ahc1 at pci0 dev 6 function 0 "Adaptec AIC-7890/1 U2" rev 0x00: irq 12
ahc1: Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 20.0MHz, offset = 0xf
sd0 at scsibus0 targ 0 lun 0: <IBM, DCAS-32160W, S65A> SCSI2 0/direct fixed
sd0: 2063MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sec, 4226725 sec total
ahc1: target 1 using 16bit transfers
ahc1: target 1 synchronous at 10.0MHz, offset = 0xf
ahc1: target 1 using tagged queuing
sd1 at scsibus0 targ 1 lun 0: <IBM OEM, DCHS09W, 2222> SCSI2 0/direct fixed
sd1: 8689MB, 6082 cyl, 18 head, 162 sec, 512 bytes/sec, 17796077 sec total
ahc1: target 4 using 8bit transfers
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0 at scsibus0 targ 4 lun 0: <PLEXTOR, CD-R PX-W124TS, 1.05> SCSI2 5/cdrom removable
.....
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x0
    SENSE KEY: Not Ready
     ASC/ASCQ: ASC 0x3a ASCQ 0x02
cd0(ahc1:4:0): Check Condition on opcode 0x0
    SENSE KEY: Not Ready
     ASC/ASCQ: ASC 0x3a ASCQ 0x02
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x43
    SENSE KEY: Illegal Request
     ASC/ASCQ: Illegal Field in CDB
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x8
    SENSE KEY: Illegal Request
     ASC/ASCQ: Logical Block Address Out of Range
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x43
    SENSE KEY: Illegal Request
     ASC/ASCQ: Illegal Field in CDB
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x8
    SENSE KEY: Illegal Request
     ASC/ASCQ: Logical Block Address Out of Range
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x43
    SENSE KEY: Illegal Request
     ASC/ASCQ: Illegal Field in CDB
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x8
    SENSE KEY: Illegal Request
     ASC/ASCQ: Logical Block Address Out of Range
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x43
    SENSE KEY: Illegal Request
     ASC/ASCQ: Illegal Field in CDB
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x8
    SENSE KEY: Illegal Request
     ASC/ASCQ: Logical Block Address Out of Range
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x43
    SENSE KEY: Illegal Request
     ASC/ASCQ: Illegal Field in CDB
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
cd0(ahc1:4:0): Check Condition on opcode 0x8
    SENSE KEY: Illegal Request
     ASC/ASCQ: Logical Block Address Out of Range
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
ahc1: target 4 synchronous at 20.0MHz, offset = 0x8

Follow-Ups:
- Re: cdrom33.fs for AIC7XXX
  - From: "Marco Peereboom" <slash@peereboom.us>

References:
- -current + AIC7890... How to create a boot floppy?
  - From: Abram.Farber@t-online.de (Alex Farber)
- Re: -current + AIC7890... How to create a boot floppy?
  - From: Abram.Farber@t-online.de (Alex Farber)

Prev by Date: Re: hint
Next by Date: Re: 2.9 and perl 5.8.0 question
Prev by thread: Re: -current + AIC7890... How to create a boot floppy?
Next by thread: Re: cdrom33.fs for AIC7XXX
Index(es):
- Date
- Thread