[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: cdrom33.fs for AIC7XXX

To: "'Alexander Farber'" <Alexander.Farber@t-online.de>,<misc@openbsd.org>
Subject: Re: cdrom33.fs for AIC7XXX
From: "Marco Peereboom" <slash@peereboom.us>
Date: Mon, 5 May 2003 08:20:57 -0500
Organization: peereboom.us

Ouch! Time for some new hard drives dude!

And the kernel is complaining that the CD tray is open. It might be a
lot more silent if you close it during boot :-)
It is now complaining about 0x00 TUR (Test Unit Ready), 0x43 (READ TOC)
& 0x08 (READ)

> -----Original Message-----
> From: owner-misc@openbsd.org [mailto:owner-misc@openbsd.org] 
> On Behalf Of Alexander Farber
> Sent: Monday, May 05, 2003 05:47
> To: misc@openbsd.org
> Subject: cdrom33.fs for AIC7XXX
> 
> 
> Naddy's script has worked for me for the 3.3 and I've 
> been able to install it on my PC with Adaptec AIC7890 
> SCSI-controller. You can find the cdrom33.fs and bsd 
> http://home.t-online.de/home/Alexander.Farber/aic7xxx/
> 
> I still have warnings from the ahc driver though
> (notably not with my both ultra-wide SCSI hard disks,
> but only with ultra-SCSI Plextor CD-burner):
> 
> .....
> ahc1 at pci0 dev 6 function 0 "Adaptec AIC-7890/1 U2" rev 0x00: irq 12
> ahc1: Wide Channel A, SCSI Id=7, 16/255 SCBs
> scsibus0 at ahc1: 16 targets
> ahc1: target 0 using 16bit transfers
> ahc1: target 0 synchronous at 20.0MHz, offset = 0xf
> sd0 at scsibus0 targ 0 lun 0: <IBM, DCAS-32160W, S65A> SCSI2 
> 0/direct fixed
> sd0: 2063MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sec, 
> 4226725 sec total
> ahc1: target 1 using 16bit transfers
> ahc1: target 1 synchronous at 10.0MHz, offset = 0xf
> ahc1: target 1 using tagged queuing
> sd1 at scsibus0 targ 1 lun 0: <IBM OEM, DCHS09W, 2222> SCSI2 
> 0/direct fixed
> sd1: 8689MB, 6082 cyl, 18 head, 162 sec, 512 bytes/sec, 
> 17796077 sec total
> ahc1: target 4 using 8bit transfers
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0 at scsibus0 targ 4 lun 0: <PLEXTOR, CD-R PX-W124TS, 1.05> 
> SCSI2 5/cdrom removable .....
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x0
>     SENSE KEY: Not Ready
>      ASC/ASCQ: ASC 0x3a ASCQ 0x02
> cd0(ahc1:4:0): Check Condition on opcode 0x0
>     SENSE KEY: Not Ready
>      ASC/ASCQ: ASC 0x3a ASCQ 0x02
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x43
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Illegal Field in CDB
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x8
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Logical Block Address Out of Range
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x43
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Illegal Field in CDB
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x8
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Logical Block Address Out of Range
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x43
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Illegal Field in CDB
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x8
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Logical Block Address Out of Range
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x43
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Illegal Field in CDB
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x8
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Logical Block Address Out of Range
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x43
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Illegal Field in CDB
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> cd0(ahc1:4:0): Check Condition on opcode 0x8
>     SENSE KEY: Illegal Request
>      ASC/ASCQ: Logical Block Address Out of Range
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8
> ahc1: target 4 synchronous at 20.0MHz, offset = 0x8

References:
- cdrom33.fs for AIC7XXX
  - From: Alexander.Farber@t-online.de (Alexander Farber)

Prev by Date: Re: hint
Next by Date: Re: hint
Prev by thread: cdrom33.fs for AIC7XXX
Next by thread: /dev/rst0 'Device busy' problem
Index(es):
- Date
- Thread