[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

OpenBSD on my TiBook



I decided to wipe out from existance OS X from my TiBook and run OpenBSD 3.3 instead. The install was quite straight forward once I got my disk geometry in fdisk right. OpenBSD mostly works on TiBook but it has several problems that range from would-be-nice-to-have to really annoying problems. Help would be appreciated:

1. Brightness keys. I read that the brightness and eject keys are supported but they don't work. 
2. My keyboard layout is in spanish and it is all messed up. There seems to be no support for spanish layout.
3. Under KDE the layout is even worse, the backspace key works like a del key (so there is no backspace!) and Konsole prints a ~ for most of my non alpha keys (like the backspace, so I don't have neither backspace nor del under kconsole)
4. The built-in trackpad only has one button so I need to use an external usb mouse. I've read that you can emulate the right button and should be quite easy once you know how to do it...
5. KDE's keyboard layout program does nothing. I've selected spanish macintosh layout but it does absolutely nothing.
6. apmd runs and will give you the battery status. However the computer is running really hot and the fan is on most of the time. Battery life has gone down to under one hour (as opposed to almost three with OS X). KDE has problems reporting the battery status with the Power Management icon, but gkrellms does a good job.
7. When I exit my X session the screen is totaly messed up and the screen wabbles. Rebooting fixes the screen.
8. Reboot works great, but shutting down with -h won't power off the computer. After the disk sync the display turns white and you have to force power off by pressing the key for 5 secs.

Sound and Firewire are not working but I already knew they were not supported. 

Here's my dmesg output:

[ using 311836 bytes of bsd ELF symbol table ]
console out [ATY,Stone_A]console in [keyboard] ADB found
using parent ATY,StoneParent:: memaddr b8000000 size 8000000, : consaddr bc008000, : ioaddr b0020000, size 20000: memtag 8000, iotag 8000: width 1152 linebytes 1280 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2003 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.3 (GENERIC) #39: Sat Mar 29 13:18:14 MST 2003
    deraadt@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 536870912 (524288K)
avail mem = 484810752 (473448K)
using 1254 buffers containing 26841088 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 7450 (Revision 201): 667 MHz: 256KB L2 cache
memc0 at mainbus0: uni-n
mpcpcibr0 at mainbus0: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N2 AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Radeon Mobility M6 LY" rev 0x00, mmio
wsdisplay0 at vgafb0: console (std, vt100 emulation)
mpcpcibr1 at mainbus0: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0: version 0x4614
gpio_obio0 at macobio0
gpio_obio1 at gpio_obio0 irq 47
programmer-switch at gpio_obio0 not configured
firewire-linkon at gpio_obio0 not configured
gpio5 at gpio_obio0 not configured
gpio6 at gpio_obio0 not configured
gpio11 at gpio_obio0 not configured
extint-gpio15 at gpio_obio0 not configured
zsc0 at macobio0: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at macobio0 irq 25: via-pmu 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: iBook keyboard with inverted T (ISO layout)
wskbd0 at akbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 99% charged
wdc0 at macobio0 irq 19: DMA transfer
wd0 at wdc0 channel 0 drive 0: <IBM-IC25N030ATDA04-0>
wd0: 16-sector PIO, LBA, 28615MB, 16383 cyl, 16 head, 63 sec, 58605120 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 irq 20: DMA transfer
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8121, AX21> SCSI0 5/cdrom removable
cd0(wdc1:0:0): using BIOS timings, DMA mode 2
wdc2 at macobio0 irq 21: DMA transfer
wi0 at macobio0 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:1c:48:cb
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.10, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume/eject buttons
apm0 at adb0: battery flags 0x5, 99% charged
wdc0 at macobio0 irq 19: DMA transfer
wd0 at wdc0 channel 0 drive 0: <IBM-IC25N030ATDA04-0>
wd0: 16-sector PIO, LBA, 28615MB, 16383 cyl, 16 head, 63 sec, 58605120 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 irq 20: DMA transfer
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8121, AX21> SCSI0 5/cdrom removable
cd0(wdc1:0:0): using BIOS timings, DMA mode 2
wdc2 at macobio0 irq 21: DMA transfer
wi0 at macobio0 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:1c:48:cb
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.10, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cbb0 at pci1 dev 26 function 0 "Texas Instruments PCI1410 PCI-CardBus" rev 0x02: irq 58
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
mpcpcibr2 at mainbus0: uni-north, Revision 0xff
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
"AT&T/Lucent FW322 1394" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple GMAC" rev 0x01
gem0: address 00:03:93:82:3b:56
eephy0 at gem0 phy 0: Marvell 88E1000* Gigabit PHY
gem0: using irq 41 for interrupt
bootpath: '/pci@f2000000/mac-io@17/ata-4@1f000/disk@0/bsd'
boot device: wd0.
root on wd0a
rootdev=0x0 rrootdev=0xb00 rawdev=0xb02