burn cd & dvd-r + openbsd

[julien Touche <julien.touche@lycos.com>]

i'm trying to burn dvd-r/-rw on openbsd. i have made iso file with 
mkhybrid and dvdrtools-0.1.5 compiles well. Problem is scanbus returns 
nothing

# ./dvdrecord -scanbus
dvdrtools v0.1.4
[snip]
Cdrecord 1.11a15 (i386-unknown-openbsd3.2) Copyright (C) 1995-2001 Jörg 
Schilling
./dvdrecord: No such file or directory. Cannot open SCSI driver.
./dvdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you 
are root.


# dmesg|grep cd
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-104, 1.33> SCSI0 
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
  address 00:04:76:24:cd:fa
# cdrecord -scanbus 

Cdrecord 1.10 (i386-unknown-openbsd3.2) Copyright (C) 1995-2001 Jörg 
Schilling
cdrecord: No such file or directory. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you 
are root.
#

so is there some SCSI emulation to enable or standalone ATAPI burner are 
supported ?

with testing, i find, but ...
#./dvdrecord -dao -v -dummy speed=2 dev=/dev/rcd0c:0,0,0 /share3/rw.iso
[snip]
Cdrecord 1.11a15 (i386-unknown-openbsd3.2) Copyright (C) 1995-2001 Jörg 
Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/rcd0c:0,0,0'
devname: '/dev/rcd0c'
scsibus: 0 target: 0 lun: 0
Using libscg version 'bero-0.5a'
./dvdrecord: Warning: using inofficial version of libscg (bero-0.5a 
'@(#)scsitransp.c   1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
atapi: 0
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-104 '
Revision       : '1.33'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1638400 = 1600 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  3178 MB
Total size:     3650 MB (361:38.26) = 1627370 sectors
Lout start:     3650 MB (361:40/20) = 1627370 sectors
Current Secsize: 2048
   ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2297888 Blocks current: 2297888 Blocks remaining: 670518
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
./dvdrecord: Input/output error. reserve track: scsi sendcmd: retryable 
error
CDB:  53 00 00 00 00 00 18 D4 EA 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.006s timeout 200s
./dvdrecord: Cannot open new session.
./dvdrecord: fifo had 68 puts and 0 gets.
./dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

any ideas ?


Regards

		Julien