Re: burn cd & dvd-r + openbsd

["Fco. Valladolid" <francisco@vmicrosistemas.com>]

Try 

# cdrecord dev=/dev/rcd0c -scanbus

for the raw device.


for burn then try, # cdrecord -v dev=/dev/rcd0c speed=8 file.iso

Fco.


On Mon, Sep 01, 2003 at 11:03:46PM +0200, julien Touche wrote:
> i'm trying to burn dvd-r/-rw on openbsd. i have made iso file with 
> mkhybrid and dvdrtools-0.1.5 compiles well. Problem is scanbus returns 
> nothing
> 
> # ./dvdrecord -scanbus
> dvdrtools v0.1.4
> [snip]
> Cdrecord 1.11a15 (i386-unknown-openbsd3.2) Copyright (C) 1995-2001 Jörg 
> Schilling
> ./dvdrecord: No such file or directory. Cannot open SCSI driver.
> ./dvdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you 
> are root.
> 
> 
> # dmesg|grep cd
> cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-104, 1.33> SCSI0 
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
>  address 00:04:76:24:cd:fa
> # cdrecord -scanbus 
> 
> Cdrecord 1.10 (i386-unknown-openbsd3.2) Copyright (C) 1995-2001 Jörg 
> Schilling
> cdrecord: No such file or directory. Cannot open SCSI driver.
> cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you 
> are root.
> #
> 
> so is there some SCSI emulation to enable or standalone ATAPI burner are 
> supported ?
> 
> with testing, i find, but ...
> #./dvdrecord -dao -v -dummy speed=2 dev=/dev/rcd0c:0,0,0 /share3/rw.iso
> [snip]
> Cdrecord 1.11a15 (i386-unknown-openbsd3.2) Copyright (C) 1995-2001 Jörg 
> Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '/dev/rcd0c:0,0,0'
> devname: '/dev/rcd0c'
> scsibus: 0 target: 0 lun: 0
> Using libscg version 'bero-0.5a'
> ./dvdrecord: Warning: using inofficial version of libscg (bero-0.5a 
> '@(#)scsitransp.c   1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling').
> atapi: 0
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   :
> Vendor_info    : 'PIONEER '
> Identifikation : 'DVD-RW  DVR-104 '
> Revision       : '1.33'
> Device seems to be: Generic mmc2 DVD.
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags   : SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Drive buf size : 1638400 = 1600 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  3178 MB
> Total size:     3650 MB (361:38.26) = 1627370 sectors
> Lout start:     3650 MB (361:40/20) = 1627370 sectors
> Current Secsize: 2048
>   ATIP start of lead in:  -150 (00:00/00)
> Disk type:    unknown dye (reserved id code)
> Manuf. index: -1
> Manufacturer: unknown (not in table)
> Blocks total: 2297888 Blocks current: 2297888 Blocks remaining: 670518
> Starting to write CD/DVD at speed 1 in dummy mode for single session.
> Last chance to quit, starting dummy write in 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> trackno=0
> BURN-Free is ON.
> ./dvdrecord: Input/output error. reserve track: scsi sendcmd: retryable 
> error
> CDB:  53 00 00 00 00 00 18 D4 EA 00
> status: 0x0 (GOOD STATUS)
> cmd finished after 0.006s timeout 200s
> ./dvdrecord: Cannot open new session.
> ./dvdrecord: fifo had 68 puts and 0 gets.
> ./dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
> 
> any ideas ?
> 
> 
> Regards
> 
> 		Julien