[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Crash and dump

 Hi there!

 I'm using OpenBSD 3.3 in an i386 machine. It sometimes crashes and
 when i try to create a dump with "boot dump" it says "device not
 ready". I'm using the GENERIC kernel with two modifications: i
 set the number of ppp devices to 32 and I added the Eicon DIVA
 852 to the list of USB devices. I've read the crash and config man
 pages but it still unclear for me how to set a dump device.

 Would you give me some point to start please.
 Thank-you:
 Istvan Zoltan Toth

 dmesg here:

OpenBSD 3.3 (DIVA852) #0: Thu Jul 24 16:03:38 CEST 2003
    holi@stalker.elmaswift.hu:/usr/src/sys/arch/i386/compile/DIVA852
cpu0: AMD Duron Model 7 (Morgan) ("AuthenticAMD" 686-class) 1.30 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SIMD
real mem  = 133738496 (130604K)
avail mem = 118321152 (115548K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/29/02, BIOS32 rev. 0 @ 0xfdae0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf7950/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 PCI System I/O Chipset" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 735 Host-PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia Vanta" rev 0x15
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 PCI System I/O Chipset" rev 0x00
ohci0 at pci0 dev 2 function 2 "SIS 5597/5598 USB" rev 0x07: irq 10, OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 3 "SIS 5597/5598 USB" rev 0x07: irq 12, OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 16383 cyl, 16 head, 63 sec, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8520B, 1.00> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97 Audio" rev 0xa0: irq 10, SiS7012 AC97
ac97: codec id 0x434d4941
audio0 at auich0
dc0 at pci0 dev 11 function 0 "Accton Technology EN2242" rev 0x11: irq 12 address 00:04:e2:25:ab:ea
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000749, model 0x0001, rev. 1
dc1 at pci0 dev 13 function 0 "Accton Technology EN2242" rev 0x11: irq 10 address 00:04:e2:25:bb:87
ukphy1 at dc1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x000749, model 0x0001, rev. 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask d440 netmask d440 ttymask d4c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
umodem0 at uhub1 port 1 configuration 1 interface 0umodem1 at uhub0 port 1 configuration 1 interface 0
umodem0: EICON NETWORKS Diva 852 ISDN TA USB, rev 1.00/1.00, addr 2, iclass 2/2
umodem0: data interface 1, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0

umodem1: EICON NETWORKS Diva 852 ISDN TA USB, rev 1.00/1.00, addr 2, iclass 2/2
umodem1: data interface 1, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub1 port 2 configuration 1 interface 0umodem3 at uhub0 port 3 configuration 1 interface 0
umodem3: EICON NETWORKS Diva 852 ISDN TA USB, rev 1.00/1.00, addr 3, iclass 2/2
umodem3: data interface 1, has CM over data, has break
umodem3: status change notification available
ucom2 at umodem3

umodem2: EICON NETWORKS Diva 852 ISDN TA USB, rev 1.00/1.00, addr 3, iclass 2/2
umodem2: data interface 1, has CM over data, has break
umodem2: status change notification available
ucom3 at umodem2