[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: three NIC problem



Not sure if this is the correct answer for you but double check the
/etc/hosts file and make sure it looks right.

Peter Verhagen

> Hi
>
> I'm trying to run a machine with three (intel fxp) interfaces on QDI
> Kinetiz 7B/E (BIOS upgraded) and I'm unable to activate the third
> one.
> Ifconfig shows that everything is OK, IP, even the speed is correct
> if I
> connect another device to it. But pinging is impossible. I got "host
> is
> down" responses every time. After connecting the same device to the
> second NIC everything runs ok.
> I thought the problem was that NIC's IRQ is shared with the
> multimedia
> device (onboard).
> I disabled every possible device in BIOS (second IDE channel, COM
> and
> LPT ports, USB, etc), but the NIC and the sound card always have IRQ
> 15.
> I've also tried to disable pcibios but without success.
> When I disable the onboard audio in BIOS then the booting will hang
> at fd0 at fdco.... See dmesg.
> I've tried to switch ACPI ON/OFF, PNP OS ON/OFF etc...
> Then I switched the audio off by changing the jumper position on the
> mainboard. The funny thing is, that nothing happened and I'm still
> unable to ping through the third NIC :-( I've tried to place the NIC
> in
> defferent PCI slots without success. And the NIC is OK, cause I've
> tried
> different combinations (not in all yet). Only two NICs - in the
> first
> PCI slot (right under the AGP slot) and second one will work.
>
> Can anybody help me please?
>
> Thanks
>
> Peter Huncar
>
> Dmesg follows:
>
> OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
>     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Athlon Model 4 (Thunderbird) ("AuthenticAMD" 686-class)
> 797
> MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
> XSR
> real mem  = 267956224 (261676K)
> avail mem = 242352128 (236672K)
> using 3296 buffers containing 13500416 bytes (13184K) of memory
> mainbus0
> (root) bios0 at mainbus0: AT/286+(47) BIOS, date 03/07/03, BIOS32
> rev. 0
> @ 0xfb1f0 apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb670
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdc00/160 (8 entries)
> pcibios0: PCI Exclusive IRQs: 10 11 15
> pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A PCI-ISA"
> rev
> 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev  function  "VIA VT8363 Host" rev 0x03
> ppb0 at pci0 dev 1 function  "VIA VT8363 PCI-AGP" rev 0x00 pci1 at
> ppb0
> bus 1 vga1 at pci1 dev  function  "S3 Trio3D AGP" rev 0x01
> wsdisplay0
> at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 7 function  "VIA VT82C686 PCI-ISA" rev 0x40
> pciide0
> at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
> channel 0
> configured to compatibility, channel 1 configured to compatibility
> wd0
> at pciide0 channel  drive 0: <Maxtor 90576D4>
> wd0: 16-sector PIO, LBA, 5495MB, 11166 cyl, 16 head, 63 sec,
> 11255328
> sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40
> auvia0 at
> pci0 dev 7 function 5 "VIA VT82C686 AC97 Audio" rev 0x50: irq 15
> ac97: codec id 0x41445348 (Analog Devices AD1881A)
> ac97: codec features headphone, Analog Devices Phat Stereo audio0 at
> auvia0 fxp0 at pci0 dev 9 function  "Intel 82557" rev 0x0c: irq 10,
> address 00:02:b3:c9:71:f3 inphy0 at fxp0 phy 1: i82555 10/100 media
> interface, rev. 4 fxp1 at pci0 dev 10 function  "Intel 82557" rev
> 0x0c:
> irq 11, address 00:02:b3:c9:73:55 inphy1 at fxp1 phy 1: i82555
> 10/100
> media interface, rev. 4 fxp2 at pci0 dev 11 function  "Intel 82557"
> rev
> 0x0c: irq 15, address 00:02:b3:c9:71:ef inphy2 at fxp2 phy 1: i82555
> 10/100 media interface, rev. 4 isa0 at pcib0 isadma0 at isa0 pckbc0
> at
> isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> -------------------------------------------------------
> stops and hangs when onboard audio is disabled in bios
> -------------------------------------------------------
> biomask 4040 netmask cc40 ttymask cc42
> pctr: user-level cycle counter enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302