[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: usb mouse detected but not working

To: misc@openbsd.org
Subject: Re: usb mouse detected but not working
From: Christopher Ingram <cmi@crystalsands.net>
Date: Fri, 19 Sep 2003 21:07:06 -0400
References: <20030919230653.GA19087@bunny.tickel.net>
User-Agent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.5b) Gecko/20030902 Thunderbird/0.2

Its been awhile but did you try /dev/wsmouse0? wsmouse0 is what's listed.

Tim wrote:
> I've got a ps/2 mouse hooked up to a ps/2 to usb adapter that
> appears to be detected fine (dmesg below) but does not work --
> wsmoused and X both don't tell me there's any problem, but I
> move the mouse and nothing happens....wsmoused is run without
> any arguments, and X is setup with protocol wsmouse, device
> /dev/wsmouse.  I am running the latest snapshot (Sept 17).
> 
> I've hooked it up to another machine and it worked fine, so I
> imagine I must just be missing something...
> Any suggestions on how to fix this or track down the problem
> are appreciated.
> 
> Regards,
> 
> Tim
> 
> dmesg:
> OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
>     deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 399 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
> real mem  = 268009472 (261728K)
> avail mem = 242401280 (236720K)
> using 3297 buffers containing 13504512 bytes (13188K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(35) BIOS, date 11/22/99, BIOS32 rev. 0 @ 0xfd7a0
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev. 2.1 @ 0xfd7a0/0x860
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf30/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xe0000/0x4000! 0xe4000/0xc000
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLP AS20.5>
> wd0: 16-sector PIO, LBA, 19595MB, 16383 cyl, 16 head, 63 sec, 40132503 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <ATAPI, CD-RW 52X24, K.SC> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
> wi0 at pci0 dev 13 function 0 "Intersil PRISM2.5 Mini-PCI WLAN" rev 0x01: irq 10
> wi0: PRISM2.5 ISL3874A(Mini-PCI), Firmware 1.0.5 (primary), 1.3.4 (station), address 00:06:25:a7:4c:53
> sis0 at pci0 dev 14 function 0 "NS DP83815 10/100" rev 0x00: irq 5 address 00:09:5b:09:e8:d4
> nsphyter0 at sis0 phy 0: DP83815 10/100 integrated, rev. 1
> fxp0 at pci0 dev 15 function 0 "Intel 82557" rev 0x08: irq 11, address 00:90:27:c1:ff:12
> inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
> vga1 at pci0 dev 16 function 0 "Matrox MGA Millennium II 2164W" rev 0x00
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: density unknown
> biomask c240 netmask ce60 ttymask ce62
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> uhidev0 at uhub0 port 2 configuration 1 interface 0
> uhidev0: Composite USB PS2 Converter USB to PS2 Adaptor  v1.09, rev 1.10/0.01, addr 2, iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 2 configuration 1 interface 1
> uhidev1: Composite USB PS2 Converter USB to PS2 Adaptor  v1.09, rev 1.10/0.01, addr 2, iclass 3/1
> uhidev1: 3 report ids
> ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
> 
> 

-- 
Christopher Ingram
   cmi@crystalsands.net
   Member of http://www.lineman.net

References:
- usb mouse detected but not working
  - From: Tim <twt@globodom.com>

Prev by Date: Re: 2.9 to 3.3 upgrade
Next by Date: OpenSSH recompile problem
Prev by thread: usb mouse detected but not working
Next by thread: 2.9 to 3.3 upgrade
Index(es):
- Date
- Thread