[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: unknown-openbsd3.4

To: <misc@openbsd.org>
Subject: Re: unknown-openbsd3.4
From: Alatakis@t-online.de (Chris Alatakis)
Date: Tue, 10 Feb 2004 22:34:29 +0100
Is there any way I can be sure about if I the box running currnet release or
stable?

I have till now update my ports from the stable branch and I want to
recompile the system.

What I do?

This is my dmesg output during boot.
Please help..

Chipset" rev 0x00
sis0 at pci0 dev 1 function 1 "SIS 900 10/100BaseTX" rev 0x82: irq 11
address 04:29:02:50:80:00
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000020, model 0x0020, rev. 1
ppb0 at pci0 dev 2 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 6300" rev 0x31: aperture at 0xc0000000,
size 0x400000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 4040 netmask 4840 ttymask 48c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon XP Model 6 (Palomino) ("AuthenticAMD" 686-class) 1.10 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,
SIMD
real mem  = 519680000 (507500K)
avail mem = 475926528 (464772K)
using 4278 buffers containing 26087424 bytes (25476K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/09/01, BIOS32 rev. 0 @ 0xfdae0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf8360/96 (4 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 PCI System I/O
Chipset" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x8000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 730 Host-PCI" rev 0x02
pciide0 at pci0 dev 0 function 1 "SIS 5513 EIDE" rev 0xd0: 730: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800BB-18CAA0>
wd0: 16-sector PIO, LBA, 76293MB, 16383 cyl, 16 head, 63 sec, 156250000
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
pcib0 at pci0 dev 1 function 0 "SIS 85C503 PCI System I/O Chipset" rev 0x00
sis0 at pci0 dev 1 function 1 "SIS 900 10/100BaseTX" rev 0x82: irq 11
address 04:29:02:50:80:00
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000020, model 0x0020, rev. 1
ppb0 at pci0 dev 2 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 6300" rev 0x31: aperture at 0xc0000000,
size 0x400000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 4040 netmask 4840 ttymask 48c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
arplookup: unable to enter address for 66.90.81.238
arplookup: unable to enter address for 66.90.81.238
arplookup: unable to enter address for 66.90.81.238
arplookup: unable to enter address for 66.90.81.238
arplookup: unable to enter address for 66.90.81.238
arplookup: unable to enter address for 66.90.81.238
arplookup: unable to enter address for 66.90.81.238
arplookup: unable to enter address for 66.90.81.238
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arp info overwritten for 66.90.81.57 by 00:e0:18:6d:5e:b9 on sis0
arp info overwritten for 66.90.81.57 by 00:0a:e6:b6:c0:d8 on sis0
arp info overwritten for 66.90.81.57 by 00:e0:18:6d:5e:b9 on sis0
arp info overwritten for 66.90.81.57 by 00:0a:e6:b6:c0:d8 on sis0
arp info overwritten for 66.90.81.57 by 00:e0:18:6d:5e:b9 on sis0
arp info overwritten for 66.90.81.57 by 00:0a:e6:b6:c0:d8 on sis0
arp info overwritten for 66.90.81.57 by 00:e0:18:6d:5e:b9 on sis0
arp info overwritten for 66.90.81.57 by 00:0a:e6:b6:c0:d8 on sis0
arp info overwritten for 66.90.81.57 by 00:e0:18:6d:5e:b9 on sis0
arp info overwritten for 66.90.81.57 by 00:0a:e6:b6:c0:d8 on sis0
arp info overwritten for 66.90.81.57 by 00:e0:18:6d:5e:b9 on sis0
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
arplookup: unable to enter address for 66.90.81.226
OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon XP Model 6 (Palomino) ("AuthenticAMD" 686-class) 1.10 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX
,FXSR,SIMD
real mem  = 519680000 (507500K)
avail mem = 475926528 (464772K)
using 4278 buffers containing 26087424 bytes (25476K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/09/01, BIOS32 rev. 0 @ 0xfdae0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf8360/96 (4 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 PCI System I/O
Chipset" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x8000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 730 Host-PCI" rev 0x02
pciide0 at pci0 dev 0 function 1 "SIS 5513 EIDE" rev 0xd0: 730: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800BB-18CAA0>
wd0: 16-sector PIO, LBA, 76293MB, 16383 cyl, 16 head, 63 sec, 156250000
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
pcib0 at pci0 dev 1 function 0 "SIS 85C503 PCI System I/O Chipset" rev 0x00
sis0 at pci0 dev 1 function 1 "SIS 900 10/100BaseTX" rev 0x82: irq 11
address 04:29:02:50:80:00
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000020, model 0x0020, rev. 1
ppb0 at pci0 dev 2 function 0 "SIS 86C201 Host-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 6300" rev 0x31: aperture at 0xc0000000,
size 0x400000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 4040 netmask 4840 ttymask 48c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted

| On Tue, Feb 10, 2004 at 12:22:57AM +0100, Chris Alatakis wrote:
| > zeus# uname -a
| > OpenBSD my.domain 3.4 GENERIC#18 i386
| > zeus# uname
| > zeus# mysql -V
| > mysql  Ver 11.18 Distrib 3.23.57, for """"unknown""""-openbsd3.4 (i386)
| >
| >
| > That is release or  stable? I think there is no way that can be current.
|
| It could be -current ...
|
| funk:~% uname -a
| OpenBSD funk 3.4 GENERIC#4 i386
| funk:~% mysql -V
| mysql  Ver 12.22 Distrib 4.0.17, for unknown-openbsd3.4 (i386)
| funk:~% head -1 /var/run/dmesg.boot
| OpenBSD 3.4-current (GENERIC) #4: Thu Jan 22 14:23:14 MST 2004
| funk:~%
|
| I believe the "unknown" is the processor type used during compilation,
| which doesn't matter too much, because i386 binaries should run on any
| OpenBSD i386 supported CPU.
|
| --
| <jakemsr@jakemsr.com>
|
|
Follow-Ups:
- Re: unknown-openbsd3.4
  - From: Bryan Irvine <bryan.irvine@kingcountyjournal.com>
- Re: unknown-openbsd3.4
  - From: lists@scapa.dnsalias.net
Prev by Date: Re: Newbie with a software RAID question
Next by Date: Re: Modems and NICs'
Prev by thread: Re: unknown-openbsd3.4
Next by thread: Re: unknown-openbsd3.4
Index(es):
- Date
- Thread