[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Broadcom 44xx Ethernet Card Not Recognized

On Fri, Feb 13, 2004 at 06:38:31PM -0500, Ted Unangst wrote:
> fyi, bce was just committed to current which supports this chip.

Seems to work here on ASUS A7V8X mainboard:

newhope:alex {1005} ifconfig bce0
bce0: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
        address: 00:e0:18:d1:19:99
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet 192.168.1.44 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::2e0:18ff:fed1:1999%bce0 prefixlen 64 scopeid 0x1

newhope:alex {1006} dmesg
OpenBSD 3.4-current (GENERIC.newhope) #3: Sat Feb 14 18:00:03 UTC 2004
    alex@newhope.my.domain:/sys/arch/i386/compile/GENERIC.newhope
cpu0: AMD Athlon(TM) XP 2400+ ("AuthenticAMD" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 536440832 (523868K)
avail mem = 491347968 (479832K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e9) BIOS, date 08/18/03, BIOS32 rev. 0 @ 0xf1aa0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x2162
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf2080/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C586 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc800 0xd0000/0x5000! 0xd8000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8235 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
bce0 at pci0 dev 9 function 0 "Broadcom BCM4401" rev 0x01: irq 3, address 00:e0:18:d1:19:99
ukphy0 at bce0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0036, rev. 0
"AVM Fritz v2.0 ISDN" rev 0x02 at pci0 dev 11 function 0 not configured
fxp0 at pci0 dev 13 function 0 "Intel 82557" rev 0x08: irq 11, address 00:02:b3:1a:eb:57
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
vendor "TigerJet Network", unknown product 0x2 (class communications subclass miscellaneous, rev 0x00) at pci0 dev 14 function 0 not configured
cmpci0 at pci0 dev 15 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev 0x10: irq 3
audio0 at cmpci0
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
"VIA VT6202 USB 2.0" rev 0x82 at pci0 dev 16 function 3 not configured
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8160B, 0009> SCSI0 5/cdrom removable
wd0 at pciide0 channel 0 drive 1: <IC35L060AVER07-0>
wd0: 16-sector PIO, LBA, 58644MB, 120103200 sectors
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <WDC WD400BB-00CLB0>
wd1: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c240 netmask ca48 ttymask da4a
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0: no disk label
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: WACOM ET-0405-UV1.1-1, rev 1.00/1.11, addr 2, iclass 3/1
uhidev0: 3 report ids
uhid0 at uhidev0 reportid 2: input=7, output=0, feature=2
uhid1 at uhidev0 reportid 3: input=0, output=0, feature=2
uhub3 at uhub2 port 2
uhub3: Kawatsu Semiconductor MiniHub 4000P, class 9/0, rev 1.10/1.00, addr 3
uhub3: 4 ports with 4 removable, self powered