Re: Compiling kernel for addl. pcmcia support

["Yuri Kreutzer" <list@kreutzerweb.com>]

I'm sorry. Now I am enclosing the dmesg.

 -----Original Message-----
From: 	Yuri Kreutzer [mailto:list@kreutzerweb.com]
Sent:	Tuesday, February 17, 2004 8:09 PM
To:	'misc@openbsd.org'; 'tech@openbsd.org'
Subject:	Compiling kernel for addl. pcmcia support

Can anyone please let me know what is required for building a custom kernel
to support a pcmcia device that is not supported in 3.4? The card is a
Linksys 10/100 + 56K PC Card (PCMLM56). Linksys has directions on their
support pages for installing it on Linux, so I thought I should be able to
get it to work on OpenBSD as well, but I haven't bee able to so far.

 I have downloaded and unpacked src.tar.gz and sys.tar.gz, I just can't
figure out what I need to change in order to add this card. My dmesg is
below. Thanks in advance for any guidance you can offer.

--- Yuri


OpenBSD 3.4 (GENERIC) #18: Wed Sep 17 03:34:47 MDT 2003
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 551 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,F
XSR,SIMD
real mem  = 66695168 (65132K)
avail mem = 55975936 (54664K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a4) BIOS, date 05/15/99, BIOS32 rev. 0 @ 0xeb1e0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 71%
apm0: AC on, battery charge high, estimated 546:06 hours
pcibios0 at bios0: rev. 2.1 @ 0xe8000/0x700
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfe840/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev
0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xe2000/0x800 0xe3000/0x1000 0xe7000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64 LB" rev 0xdc
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1214GAP>
wd0: 16-sector PIO, LBA, 11513MB, 16383 cyl, 16 head, 63 sec, 23579136
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 1.5A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1225 PCI-CardBus" rev
0x01: irq 10
cbb1 at pci0 dev 10 function 1 "Texas Instruments PCI1225 PCI-CardBus" rev
0x01: irq 10
maestro0 at pci0 dev 16 function 0 "ESS Maestro 2E" rev 0x10: irq 5
ac97: codec id 0x83847600 (SigmaTel STAC9700)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at maestro0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
biomask c440 netmask c440 ttymask d4c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302